The convenience of mobility has become integral to so many aspects of our lives, and the M20d extends that convenience to the stage. Connect one or more iPad® devices simultaneously (via optional USB Wi-Fi adaptor - refer to the Wifi USB stick compatibility document in our support documents) for complete remote control over all mixer functions. Adjust the front-of-house mix from anywhere in the audience.

Each iPad® can control different screens or different parameters in addition to the mixer’s own touchscreen. Whether you’re a band member adjusting your monitor mix or a sound man out in the audience, you’ve got full control.

The following USB WiFi sticks are compatible with the M20D StageScape for use in conjunction with your iPad:

• EnGenius EUB-9801
• Samsung WIS10ABGN
• Apple USB to Ethernet adapter (UPC: 885909439560) in conjunction with a WiFi Ethernet router
  • Recommended WiFi Routers
    • Cisco Linksys E2500
    • Belkin N600
    • Any Router with DHCP

The following SD cards are compatible with the M20D:

• Any class 10 SD card is compatible with the M20D.   Only class 10 SD cards are compatible.

The Apple Airport Express has an 1/8" audio output that can be connected into the StageScape M20d.  When you do this, you can play music from your iPad's music library while using the StageScape app.  This allows you to play audio from your iPad through your StageScape without preparing a SD card.  

Wireless internet connectivity procedures:

For the EnGenius EUB-9801, Linksys AE100, and Samsung WIS10ABGN - plug in any of those USB Internet adapters to the USB port on the M20d.  Do not worry if the lights on the USB adapter do not light up, you will have internet connectivity.  Upon connecting one of these units to your StageScape M20d you will not be prompted to do anything on the StageScape M20d.  On the StageScape, go to the i menu, then Show System Settings, then WiFi. The WiFi menu will display Unit Name and Security Pin.  The Unit Name will be the name of the Wireless Network that you connect to on you iPad.  The Security Pin will be the password.  To connect to this wireless network on your iPad, go to Settings - General - Network - and you will see the M20d Unit Name as a network option. 

For the Apple USB to Ethernet adapter, plug the adapter into the USB port on your M20d.  Then connect the adapter via Ethernet cable to ANY wireless internet router.  Then on the StageScape, go to the i menu, then Show System Settings, then WiFi. The WiFi menu will display Unit Name and Security Pin.  The Unit Name will be the name of the Wireless Network that you connect to on you iPad.  The Security Pin will be the password.  To connect to this wireless network on your iPad, go to Settings - General - Network - and you will see the M20d Unit Name as a network option.