Q: Which USB WiFi products are compatible with the StageScape M20D?
A: Only the EnGenius EUB-9801, Linksys AE1000, Samsung WIS10ABGN are compatible with the StageScape M20D.
Q: Which SD cards are compatible with the StageScape M20D?
A: Any class 10 SD card will work with the StageScape M20D. Only class 10 SD cards are supported.
Q: What output on the StageScape M20d should I use for my monitor amp or powered monitors when I’m mixing?
A: Use a balanced XLR cable to connect the left and right XLR outputs labeled ‘Main Outs’ to the inputs on your monitor amp or powered monitors.
Q: How do I connect the StageScape M20d to my computer for recording?
A: Prior to connecting the StageScape M20d to your computer for recording, you will need to install the latest available Line 6 drivers from our of software page at the link below:
Follow the on screen installer instructions to install the drivers correctly. Once the driver installer is complete, connect a USB cable from the USB port labeled ‘PC’ on the StageScape M20d to a USB port on your computer.
Q: Can I use condenser mics that require 48V phantom power with the StageScape M20d?
A: The StageScape M20d has phantom power available to XLR inputs 1-12. To activate phantom power, tap the Input/Output panel located in the top center of the setup, monitor, or perform screen and then tap the ‘48v’ button to the left of inputs 1-6 and 7-12 to activate phantom power for each row of inputs.
Q: Where do I plug in headphones to the StageScape M20d to monitor the mix?
A: The StageScape M20d includes a dedicated headphone output to allow you to closely and quietly monitor your mixes. Simply connect headphones to the ¼” headphone output of the StageScape M20d and adjust the level control labeled ‘Phones’ to control the headphone mix volume.
Q: How do I get a signal out of the Main Outs on the StageScape M20d?
A: For a overview of the StageScape M20d mixing process check out the StageScape M20d support video – ‘Out of the box to the first gig’ and our Creating a mix with the StageScape M20d tutorial.
Q: How do I use floor monitors with the StageScape M20d?
A: The StageScape M20d features four independent monitor outputs each with their own separate monitor mix. Simply connect balanced XLR cables from the ‘Monitor Outs’ A,B,C, or D to the inputs of your floor monitors.
Q: How many total inputs are there on the StageScape M20d?
A: The StageScape M20d includes 20 available input channels:
- 12 high-performance, digitally controlled, auto-sensing mic/line inputs
- 4 additional auto-sensing line inputs
- 2 digital streaming inputs direct from computer, USB drive or SD card
- 1 Stereo line input for integrating MP3 players or other sound sources
Q: Where can I find product manuals for the StageScape M20d?
A: All of the available product manuals for the StageScape M20d can be found at the link below:
Q: Where do I register my new StageScape M20d?
A: Line 6 products can be registered to your Line 6 User account using the link below:
Q: What type of footswitch can I use for the footswitch inputs on the StageScape M20d?
A: The StageScape M20d works with any ¼” Tip Sleeve footswitch.
Q: Is it possible to access two Stagescapes simultaneously (or switch between them) in the ipad app?
A: It will be possible for a single iPad to switch between two StageScapes for control. It will not be able to control both simultaneously, but the user can select which StageScape to control at a time by selecting from a list of WiFi StageScapes that the iPad can communicate with.