Skip navigation
Currently Being Moderated

StageSource L2m Specifications

VERSION 1 
Created on: Jan 25, 2013 4:15 PM by line6jonb - Last Modified:  Jan 25, 2013 4:50 PM by line6jonb

Top Features

  • Smart Speaker Modes for great live sound in any live sound situation
  • Multi-function design for true scalability
  • L6 LINK™ digital networking for multi-speaker setups
  • 800-watt, 2-way, bi-amped speaker system
  • Multi-band feedback suppression
  • On-board accelerometer and pole-mount sensors
  • Virtual Tilt-back projects speaker’s output upwards in backline mode
  • Tour-grade plywood enclosure with  M10 suspension points
  • Retractable handle for easy portability

 

 

Acoustical

System Type:10”, 2-way, bi-amplified loudspeaker system
Frequency Range (-10dB):44Hz to 19kHz, (Reference/P.A. Speaker Mode, free-field)
Frequency Response (±3dB):51Hz to 18kHz, (Reference/P.A. Speaker Mode, free-field)
Maximum SPL Output:

128dB peak @ 1 meter (unweighted, measured indoors with music program material)

Coverage Pattern (-6dB):100⁰ horizontal x 50⁰ vertical
Directivity Factor (Q):9.2 (averaged 1kHz to 16kHz)           
Directivity Index (DI):9.6dB (averaged 1kHz to 16kHz)
Crossover Frequencies:LF to HF Crossover - variable, 2.2kHz to 7.0kHz (Speaker Mode dependent)
Low-Frequency Transducer:10” extended range woofer, 2” diameter voice coil, 4Ω impedance
High-Frequency Transducer:1” exit compression driver, 1.4” diameter voice coil and diaphragm, 8Ω impedance

 

 

Electrical – Rear Panel

Input Types:Line-level XLR-1/4”, balancedStereo RCA, unbalancedL6 LINK XLR
Input Impedance:100 kΩ balanced20 kΩ balancedN/A
Max Input Levels:+20dBu+16dBVN/A
Onset of Limiting:+6dBu input (Reference/P.A. Speaker Mode, Master Level control at center-detent)
-6dBu input (Reference/P.A. Speaker Mode, Master Level control at maximum)
Output Impedances:Source-dependent680Ω balancedN/A
Controls:Feedback Suppression On/Off/Mode, Master Level, Speaker Mode
Indicators:

Signal Present/Clip, Feedback Suppression On/Off/Mode, Limit, 6x Speaker Mode, L6 LINK Status

 

 

Digital Signal Processing

Speaker Modes:

Reference/P.A., Playback, Floor Monitor, Keyboards, Acoustic Guitar, Electric Guitar

On-board Effects:Feedback Suppression
Transducer Protection:Excursion limiting, thermal limiting
Digital Networking:L6 LINK intelligent speaker networking system
Sensors:

Speaker orientation, pole sensor, power amp temperature, power supply, temperature

 

 

Power Amplification and Supply

Output Channel:HFLF
Power Amplifier Type:Class ABClass D
Peak Output Power1:175 watts655 watts
Power Supply Voltage Range:100 - 240 VAC, ± 10%, 50/60Hz , automatic voltage selection
Power Consumption:250 watts (1/8th power)
Cooling:Digitally-controlled, variable-speed 50 mm fan
Protection:

Output overcurrent, overtemperature, DC fault


1 1kHz sine wave input, 1% THD+N unweighted into the nominal load impedance, single channel driven, before the onset of limiting.

 

 

Mechanical

Enclosure:

15 mm enclosure, 18 mm baffle, multi-ply hardwood, textured black paint, bass, reflex design

Floor Monitor Upward Angle:60⁰ using kickstands, 30⁰ using handle
Suspension Points:M10 x 1.5 threaded inserts, qty: 4
Pullback Point:M10 x 1.5 threaded insert, qty: 1
Grille:18-gauge perforated steel, black powder coat finish
Pole Cup:35 mm pole cup with sensor
Dimensions (HxWxD):23.75” (603 mm) x 12.25” (312 mm) x 12.25” (312 mm)
Weight:39.1 lb (17.7 kg)

 

 

Accessory Part Numbers

Speaker Bag:98-037-0002
Short Pole:98-037-0003
Long Pole:98-037-0004
Eyebolt Suspension Kit:98-037-0005

 

Comments (0)