Skip navigation

Version Comparison: UX1/UX2: Dual Input Instrument/Mic to DAW Routing (Ableton Live Lite & GarageBand)

Comparing: Revision 10 » Revision 11


 
 
Color Key: Addition Deletion Change
Revision 10   By Kneehow at 3 years, 9 months ago Revision 11   By Line6Tony at 3 years, 9 months ago

Please use the directions below in order to records two inputs from the a TonePort/POD Studio USB device from POD Farm simultaneously:

 

In POD Farm:

Create a dual tone input in POD Farm (i.e. Mic 1 & 2, Line 1 & 2, Inst & Mic, etc).

 

In Your DAW (Recording Application- we will use Ableton Live Lite as our example):

  1. Go to "Options/Preferences".
  2. Click on "Input Config" at the bottom. Make sure that all of the selections are green in "Input Config" and "Output Config". If they are not, click on them so they appear as green and click OK.
  3. Create two audio tracks.  On each track you will see "Audio From". Make sure that says "Ext. In". In track one select "1/2". For track two choose "3/4".

 

Now the mic will be recorded on one track and your guitar will be recorded on the other. To arm both tracks for recording, please hold control and then click on the "Arm" button.

For more detailed info, please watch the online video at Ableton's website here: http://cdn1.ableton.com/movies/recording_audio.mov

 

For GarageBand:

 

 

First, ensure that you have a DUAL Tone setup in POD Farm.

In the [MIXER] Section of POD Farm, ensure that REC SEND: UX2 1-2 is set to “Tone 1 (Instrument)” and REC SEND: UX2 3-4 is set to “Tone 2 (Microphone 1)”

Picture 1.png

 

In GarageBand:

Picture 2.png

 

Input Source for INST 1 (GarageBand Track) must be set to Stereo 1 / 2 (UX2)

Picture 3.png

 

Input Source for MIC 1 (GarageBand Track) must be set to: Stereo 3 / 4 (UX2).

Now you should be able to record both input sources simultaneously in GarageBand.


                                    

                                

                            		
                            
                                

                                    

                                        
Please use the directions below in order to records record two inputs from the a TonePort/POD Studio UX1/UX2 USB device from POD Farm simultaneously:
 
In POD Farm:
Create a dual tone input in POD Farm (i.e. Mic 1 & 2, Line 1 & 2, Inst & Mic, etc).
 
In Your DAW (Recording Application- we will use Ableton Live Lite as our example):
  1. Go to "Options/Preferences".
  2. Click on "Input Config" at the bottom. Make sure that all of the selections are green in "Input Config" and "Output Config". If they are not, click on them so they appear as green and click OK.
  3. Create two audio tracks.  On each track you will see "Audio From". Make sure that says "Ext. In". In track one select "1/2". For track two choose "3/4".
 
Now the mic will be recorded on one track and your guitar will be recorded on the other. To arm both tracks for recording, please hold control and then click on the "Arm" button.
For more detailed info, please watch the online video at Ableton's website here: http://cdn1.ableton.com/movies/recording_audio.mov
 
For GarageBand:
 
 
First, ensure that you have a DUAL Tone setup in POD Farm.
In the [MIXER] Section of POD Farm, ensure that REC SEND: UX2 1-2 is set to “Tone 1 (Instrument)” and REC SEND: UX2 3-4 is set to “Tone 2 (Microphone 1)”
Picture 1.png
 
In GarageBand:
Picture 2.png
 
Input Source for INST 1 (GarageBand Track) must be set to Stereo 1 / 2 (UX2)
Picture 3.png
 
Input Source for MIC 1 (GarageBand Track) must be set to: Stereo 3 / 4 (UX2).
Now you should be able to record both input sources simultaneously in GarageBand.