Q: Where can I get a Floor Pod Presets Chart?

FloorPOD Presets

Q: What is the warranty on my Floor Pod  product? 

A:  The warranty on the Floor POD and Floorpod Plus units is twelve months from the date of purchase.

Q: How can I download the manual?

Q: What power supply do I need to use?

Q: What are the MIDI jacks on my FloorPod Plus unit for?

A: The MIDI jacks on the Floorpod Plus are are used to connect to MIDI jacks to update the patches on your Floorpod Plus using the Vyzex editor.

Q: Where can I download the editor for the Floor Pod Plus?

A: You can download the Vyzex Floor POD plus editor directly from the Line 6 software downloads page:

Q: Is there a settings list for the presets used on the demonstrations?

A:There is no documentation on the settings used for the Floor POD and Floor POD Plus demonstrations

Q: How do I calibrate my Floor Pod/Plus Unit?

Floor Pod Plus

- Hold toe-switch on VOL/WAH and power unit.  The display will read ?PC? (Pedal calibration) and then ?000?.

- With the pedal at toe-position, hit the ?A? button.  The display will show 100

- With the pedal at the Heel-position, hit the ?B? button.  The display will show ?100?

- Press footswitch C to read the numeric values.  Press pedal-toe switch on and observe lights around effects encoder, which will reveal the pedal position.

- Press and hold tap switch for 2 seconds to save calibration.

Floor POD

- Power off, Hold toe switch on pedal and power on.  When ?PC? appears press and hold DIST switch until a number flashes in the Display.

- Move pedal from toe-down to heel-down position and back up to toe-down position clicking the Toe-switch.

- Wait 5 seconds and unplug power.