Currently Being ModeratedDec 8, 2011 8:46 AM (in response to robvalen)Re: Non Line 6 Amps with HD5000
Best way is to connect the pod right in to the power amp section of the amp,
Dont know if a cyber twin has a effects loop, but then you can then plug the 1/4" out of the pod in to the effects return of the amp.
You can also use " the 4 cable method" there is a line 6 vid that explains that. you then set the pod to "poweramp combo" output mode.
ofcourse plugging in front is an option but is not ideal.
Currently Being ModeratedDec 13, 2011 4:26 PM (in response to robvalen)Re: Non Line 6 Amps with HD5000
+1 to MGBlade,
You can connect the L/Mono Out on the HD500 to the power amp in or return on an amp and bypass the preamp modeling. Or connect it via the 4 Cable Method:
1. Wire: Guitar into the input of the HD500
2. Wire: Effects loop send of the HD500 into the input of your guitar amp
3. Wire: Effects loop send of the guitar amp to the effect loop return of the HD500
4. Wire: HD500 output into the effects loop return of the guitar amp
HD Output modes:
Line 6 Customer Support