Skip navigation
Up to Discussions in POD HD
1221 Views 19 Replies Latest reply: Dec 1, 2012 7:27 AM by ironcladlou RSS
Jerkon Just Startin'
Jerkon
23 posts since
Apr 10, 2011
Currently Being Moderated

Jan 26, 2012 8:45 AM

POD HD500 pedal calibration

Recently I updated the Flash Memory to v1.40 and thereafter I performed a global settings reset.

Then  I performed a re-calibration of the expression pedal.

In the firs time when I pressed the C switch to check the values the “toe” position reached 255, but the “heel” position don't reached 0, but 5.

Then I performed a new global settings reset and tryed to re-calibrate the expression pedal again.

This time, pressing the C switch the “toe” position value is ok, but the “heel” position value reached no less than 33.

Then I repeated the re-calibration process several times, but the “heel” position value never reaches “0” but only  marks  32 or 33 instead of zero.

How I solve this?

 

If anyone can help I thank you in advance.

 

Edit: I performed the pedal calibration following the instructions in this link:

http://line6.com/support/docs/DOC-2223

  • Jerkon Just Startin'
    Jerkon
    23 posts since
    Apr 10, 2011
    Currently Being Moderated
    Jan 27, 2012 3:41 PM (in response to Jerkon)
    Re: POD HD500 pedal calibration

    I solved the issue by myself.

    If anyone want to know how I did it, please ask me!!

    • pratikb Just Startin'
      pratikb
      142 posts since
      Dec 4, 2010
      Currently Being Moderated
      Jan 27, 2012 3:53 PM (in response to Jerkon)
      Re: POD HD500 pedal calibration

      Please let me know....i faced the same issue today.

       

      Thanks

      • Jerkon Just Startin'
        Jerkon
        23 posts since
        Apr 10, 2011
        Currently Being Moderated
        Jan 28, 2012 8:59 AM (in response to pratikb)
        Re: POD HD500 pedal calibration

        I removed the bottom cover and remove the sensor board and cleaned the sensor with a soft paper handkerchief.

        The two central screws don't need to be removed, because they  support a zig-zag bar that works like a reinforced pilar.

        • silverhead Expert Line 6 User
          silverhead
          9,592 posts since
          Apr 1, 2009
          Currently Being Moderated
          Jan 28, 2012 9:41 AM (in response to Jerkon)
          Re: POD HD500 pedal calibration

          Thanks, Jerkon. This solved my pedal calbration issue also. I was having the same symptom - heel position wouldn't go below about 30-35.

           

          I was a bit cautious about doing this because technically it could void the warrant, but the procedure was very simple. Just remove the 6 screws along the top and bottom edge of the back cover. Then slide the cover left or right to get it beyond the edges of the chassis for easy removal.

           

          The sensor board was also easy to remove carefully - two screws.

           

          I used a paper towel to clean both the exposed white disc on the pedal and the two sensors on the underside of the board.

           

          Problem solved.

          • PaulBateman Just Startin'
            PaulBateman
            82 posts since
            Mar 19, 2010
            Currently Being Moderated
            Mar 29, 2012 10:32 AM (in response to silverhead)
            Re: POD HD500 pedal calibration

            good find.... just looking for this... mine hits 24 everytime, tried 4 times before looking...

             

            seems like a design flaw to me... you really shouldnt need to do this.. especially since it was brand new and has never left my desk... oh well.... i end up opening everything i own anyways, why should my pod be any different! lol

          • tarun200727 Just Startin'
            tarun200727
            16 posts since
            Apr 2, 2011
            Currently Being Moderated
            Jul 13, 2012 7:28 PM (in response to silverhead)
            Re: POD HD500 pedal calibration

            my problem is little different.the pedal scaled value stuck to 0  in toe and heel position,nothing chenged when i mov the pedal.and what about warrenty?if i open my pod is there any seal to be broken????

          • tarun200727 Just Startin'
            tarun200727
            16 posts since
            Apr 2, 2011
            Currently Being Moderated
            Jul 13, 2012 7:51 PM (in response to silverhead)
            Re: POD HD500 pedal calibration

            guys guys after facing that problem i kept my pod in rest for allmost 36hr in a gig bag.i just now opend it to check on it.i just runed the pedal caleberation and god knows it perfectlly moved scaled value 0-255.tnx to god for this time.but how to make sure that it don't happend again.do i still have to open my pod and clean it??

          • daviddemetrio Just Startin'
            daviddemetrio
            4 posts since
            May 14, 2012
            Currently Being Moderated
            Oct 22, 2012 8:04 PM (in response to silverhead)
            Re: POD HD500 pedal calibration

            I did what you said but it did not work for me ... It is like the volume/wha pedal does not work... always in 0 status.... even doing the global reset, update flash and trying to calibrate the pedal...

             

            Would you have any ideas for me.. i am almost trying what one of our friends said. Keep it for about three days or some to see if it gets back...

             

            Even Line6 team does not know what happens... how come?

             

            THank you anyway...

          • ironcladlou Just Startin'
            ironcladlou
            6 posts since
            Dec 16, 2011
            Currently Being Moderated
            Nov 28, 2012 10:49 AM (in response to silverhead)
            Re: POD HD500 pedal calibration

            My HD500 is experiencing the same issue (the heel position not registering below 30-35). I tried cleaning the white disc and two sensors with a paper towel as described: now it registers a minimum of 24. This indicates to me that the cleaning may have slightly improved it, but not solved it completely.

             

            Any recommendations? I could try cleaning more vigorously with a lint-free cloth. Would using acetone to clean the sensors be safe (as it would be for cleaning other small electronic components)?

            • ironcladlou Just Startin'
              ironcladlou
              6 posts since
              Dec 16, 2011
              Currently Being Moderated
              Dec 1, 2012 7:27 AM (in response to ironcladlou)
              Re: POD HD500 pedal calibration

              Just wanted to follow up and mention that my minimum value is now registering at zero after my initial cleaning, even though at first it only showed a marginal improvement. Not sure why it went from better to working having only cleaned it once and done nothing between the two tries, but I'm not really complaining.

               

              I definitely recommend trying the sensor cleaning method, and thanks to all who suggested it!

    • daviddemetrio Just Startin'
      daviddemetrio
      4 posts since
      May 14, 2012
      Currently Being Moderated
      Oct 22, 2012 7:32 PM (in response to Jerkon)
      Re: POD HD500 pedal calibration

      My pedal is not working ... how did you solve your problem?

       

      Thank you... demetriojulio@hotmail.com...

  • Jerkon Just Startin'
    Jerkon
    23 posts since
    Apr 10, 2011
    Currently Being Moderated
    Nov 30, 2012 9:02 PM (in response to Jerkon)
    Re: POD HD500 pedal calibration

    I suggest that you instead of down the heel position of the pedal normally, pull the upper part of the pedal (toe) with the right hand to do the correct calibration.

     

    By this way it may works.

More Like This

  • Retrieving data ...

Incoming Links

Bookmarked By (1)