Currently Being ModeratedMar 26, 2012 4:33 PM (in response to Karma180)Re: Volume Control of presets
You have to level off the volume difference between the presets by ear. You can do this by using the channel volume knob.
Start with your first preset and set the level to a comfortable volume using the channel volume knob. Save the preset.
Now navigate to the next preset and use the channel volume to "match" the overall level of the first patch. Save the second preset.
Now when you switch between them the should be roughly at the same volume level.
Currently Being ModeratedMar 26, 2012 10:40 PM (in response to Line6david)Re: Volume Control of presets
+1 David. It sounds like you should be turning down the Master knob if you are hitting tones that are hurting your ears. Failing that: see if you can grab a headphone amplifier. This can be set to work like a limiter so that very loud patches from the POD do not hurt your ears so badly.
Suggest you might want to initially plug the POD into some kind of amp (even stereo) and run quickly through the patches, using the volume knob to turn down the really loud ones and saving them. If you set the Looper to Pre, record a loop and leave it running this can be a quick process.
Currently Being ModeratedApr 6, 2012 11:10 AM (in response to Karma180)Re: Volume Control of presets
Hello. It has been at least 72 hours since we've heard from you. We're going to assume your question has been answered. If it has been answered, please award points to whoever was helpful and/or answered the question.
In the event your issue has not been resolved, I created a support ticket for you so we can continue to communicate. Please respond to the ticket. Thanks!!
Q: What is a support ticket?
A: A support ticket allows you to directly correspond with a Line 6 Support Representative. An email will be sent to you from Line 6 containing a link to the ticket when a Line 6 Support Representative responds to it. Please follow the link in the email to view your open ticket to work one on one with Line 6 Support. Also, in your account, click My Account, then click Support Tickets to view the support ticket. Here’s a shortcut: http://line6.com/account/tickets/view/.
Please note: Sometimes support tickets will be filtered to spam and junk folders. If you did not receive an email from us indicating that a ticket has been created, please make sure to check those folders in your email host, and also that your email account is receiving messages at all.