Skip navigation
Up to Discussions in Flextone I / II / III / Duoverb / HD147
369 Views 4 Replies Latest reply: Jun 12, 2012 6:02 PM by harristom85 RSS
harristom85 Just Startin'
harristom85
2 posts since
May 30, 2010
Currently Being Moderated

May 19, 2012 7:34 AM

Flextone 3 hardware upgrade

I recently bought a converted flextone 3 head, it's the original flextone 3 without speaker

outs or the xlr's, I fitted a mono 1/4 jack to the left over speaker cable to use as a line out

but when I was doing this I noticed a few things on the main board 1: the main board seems

to have a 10 pin speaker out jack already fitted so where could I buy the cable for this? Also

the main board pcb has the space to fit an xlr onto it, would this be an easy task or for that matter

a worthwhile task?

 

Thanks for any information given I seem to be having trouble with people not knowing much about this sort of thing

Tags: hardware, upgrade, flextone, head, amplifier, power, iii, 3, combo, troubleshooting
  • Kneehow UberGuru
    Kneehow
    6,750 posts since
    Dec 26, 2007
    Currently Being Moderated
    Jun 4, 2012 3:56 PM (in response to harristom85)
    Re: Flextone 3 hardware upgrade

    Unfortunately, one of the things that Line 6 Forum boards have never really addressed are user-mods for our gear. For kicks, I did an archive search and I believe this thread is the only one that hints at a Flextone III Mod: http://line6.com/supportarchive/thread/17835

     

    We don't provide technical info to non-authorized service center repair technicians. If I had more info or the ability to even comment on mods, I'd offer it to you but I do not.

    • smgrimes Just Startin'
      smgrimes
      33 posts since
      Jan 30, 2008
      Currently Being Moderated
      Jun 5, 2012 6:28 AM (in response to Kneehow)
      Re: Flextone 3 hardware upgrade

      Hi Perry - I'm pretty confused by this response, as the past L6 forums were extremely active in addressing user mods - generally for speakers or remounting the chassis in another cabinet - and obviously with the understanding that L6 wasn't condoning any of them. There's still stuff out there...

       

      I'm really curious about the thread you mentioned, as it does not work. Could you please check it?

  • smgrimes Just Startin'
    smgrimes
    33 posts since
    Jan 30, 2008
    Currently Being Moderated
    Jun 5, 2012 6:37 AM (in response to harristom85)
    Re: Flextone 3 hardware upgrade

    Hi Harristrom85 - This doesn't sound right to me - the jacks for normal speaker out & XLRs are soldered to the main board, and someone would have to go to pretty extreme lengths to eliminate them. Are your controls front-mounted or left in their original position in the new headshell? Could you post some pics gut shots of the chassis, as well as front/back/etc of the head? I may be able to help and I'd love to see how it was done, as I've done a similar conversion to mine - see this thread: http://line6.com/support/message/328010#

  • harristom85 Just Startin'
    harristom85
    2 posts since
    May 30, 2010
    Currently Being Moderated
    Jun 12, 2012 6:02 PM (in response to harristom85)
    Re: Flextone 3 hardware upgrade

    Hi guys thanks for getting back to me, I don't have any pictures at the minute so i can't show you, the buttons and knobs are in the same place as usual on the top, this was an original model flex 3 so it didn't have the xlrs and mono out as standard, what it is essentially is the combo with no speaker, for some unknown reason I can hook it up to an external cab through the headphone out BUT it's not very loud I'm guessing there's an inhibitor so you don't blow your brains out when playing with headphones, the pcb board has the slots for an xlr and cab out upgrade but that's a lot of hassle and a big risk adapting it, so I figured I could solder a mono output to the remaining speaker cable which doesn't seem to have worked? The unit itself is untouched no other adjustments or mods apart from the speaker cable soldering, I may have soldered the output wrong, it's a 4 tab mono output if anyone has a wiring diagram please let me know

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • Correct Answers - 5 points
  • Helpful Answers - 3 points