Currently Being ModeratedJun 18, 2012 4:20 AM (in response to MadYarpen)Re: Problem with pedal: HD300
The toe switch is very hard to activate at first; it will loosen up over time. What you are expereincing there is normal.
There is a nut beneath the pedal that you can use to tighten/loosen the operation of the pedal. Sounds like you need to loosen that up a bit to eliminate the squeak and make the pedal move more freely. Just turn the device upside down to see the nut. All you will need is the right wrench.
Currently Being ModeratedJun 18, 2012 4:43 AM (in response to silverhead)Re: Problem with pedal: HD300
there is nothing on the down side - you mean this screw on the right? Which is located let's say on the axis of pedal? Sorry for probably stupid question, but I wouldn't like to loose warranty;)