Currently Being ModeratedJun 17, 2012 8:02 PM (in response to sandman69)Re: Where to put a BBE Sonic Maximizer with 4CM
I don't have the best answer for you but I will prepare you for the slew of anti-BBE SM comments you will most probably receive from the gang here. (or you could get very few responses at all).
I also use a BBE but it is used as a channel insert from the small mixer I have setup to run my amp guitar and all effects through as my live rig. I would use my ears if I were you and see what setup best clears up the signal for you. The BBE is a very subtle, but useful in my opinion, piece of equipment. Good luck.
Currently Being ModeratedJun 17, 2012 9:11 PM (in response to sandman69)Re: Where to put a BBE Sonic Maximizer with 4CM
I am with Karl when I say leave it out in the truck or sell it on ebay for an EQ...
The following is what will happen if you add a BBE to your rig...
"Just a word of warning. Maximizers are the guitar gear equivalent of crack. The experience one goes through is identical:
1. The first hit: You hook it up and initially think "Oh MY GOD this the greatest thing EVER DOOOOOD!!!!!111!!!!1! I've found THE tone!"
2. You start using on a regular basis: Buy some model BBE, hook to rig, engage it 100% of the time. Rewrite all your patches.
3. You try to get your friends hooked: Dude, check out my rig, this thing takes it over the top!!!.
4. You go into addiction/denial: Friends think your tone has gone to sh*t but you think it is totally awesome. You start talking msinformed BS about different sound frequencies traveling at different velocities (hint: violation of Newtonian physics).
5. There is an intervention: Friend let's you A/B his non-maximizer rig versus yours in live setting, Yours sounds like over-processed dung, his rocks. He tells you, as a Bro, the BBE must go. You realize the BBE is a band aid for guitar tone and not even a good one at that.
6. You go into rehab: Another "like new" BBE xx2 unit hits eBay.
7. Regret: I wasted a sh*tload of time futzing with my rig, patches, etc, and my tone isn't any better and I'm back to square one. I Wonder what GE-7 pedals are going for these days.
Maybe you should avoid the whole thing. If you must post-process your modelling tone I would strongly suggest an EQ. It's much more versatile and will be long usable after the BBE is gone."
- kdog circa 2005-6 I think...my favorite post ever about BBEs...
Currently Being ModeratedJun 18, 2012 9:42 AM (in response to spaceatl)Re: Where to put a BBE Sonic Maximizer with 4CM
... yet if you insist ...
I understand that the BBE is supposed to be very late in the signal chain,. The best place for it then is within cable '4' of the 4CM.
Therefore it would go
Pod 1/4" Out ---> BBE In --> BBE Out --> Amp FX Return.
If you wanted the BBE to be applied before the 'post' effects in your loop (e.g. delays etc) then put it in the hookup for cable '3' instead.
Currently Being ModeratedJun 18, 2012 1:48 PM (in response to spaceatl)Re: Where to put a BBE Sonic Maximizer with 4CM
LoL! That is hilarious. I like my BBE and have used it for quite some time... Though I keep both contour and process down. It doesn't affect the sound too much, but I think it adds a little bit of depth... maybe I am on the pipe... though... apparently! When I used just a Carvin DCM poweramp it was the last before the poweramp, so I am guessing I will put in front of the amps FX return... if I even go with the 4CM. Anyone want to buy a Carvin DCM 200? Only a couple months old. Only used for 2 gigs. Perfect condition...
And actually, my biggest issue with the 4CM method is the delays/choruses are VERY faint and if I move everything in front of the FX Loop in the chain it sounds like it should. I know it is something I am doing wrong, probably with the effects in the loop level individually as I have the return maxed dB wise. I used it back in the day with an older Boss GT8 I think it was and had no issues...
Is there something that typically needs to be adjusted in each effect in the chain?
I have taken my old set list created a new one, and gone through the ones I use and disabled the amp/cab, put in a FX Loop and moved the delays, choruses and pitches after the loop and needed to max the FX Loops return level to get the amp level to be the same with the FX loop bypassed in the amp or on.
Currently Being ModeratedJun 22, 2012 4:43 AM (in response to jimsreynolds)Re: Where to put a BBE Sonic Maximizer with 4CM
Thanks Jim!! I think it may have been the FX settings. It was on Line and not Stomp... Thanks for the document! Helpful as always.
I really like the drawing you did with more detail. I know how things work and understand what I am doing, but that is a great image! I shot to a friend of mine to help him understand the 4CM.
Currently Being ModeratedJun 22, 2012 1:25 PM (in response to spaceatl)Re: Where to put a BBE Sonic Maximizer with 4CM
I used my BBE sonic maximizer with a guy we were recording. he had a nice Marshall half stack something, vintage reissue blah blah. He couldnblt find a good sound for whatever reason. I went in and moved the mcs around a bit, inserted the BBE and set it up and what we got on hard drive was thick and huge, sits great in the mix as well. keep smoking the crack if it makes you feel good. tell all the kids
Currently Being ModeratedJun 18, 2012 11:04 AM (in response to sandman69)Re: Where to put a BBE Sonic Maximizer with 4CM
I use mine as the last item in the chain before the signal hits the power amp. If you have a second FX loop, even better.
And pay no attention to the BBE haters. I love mine for my metal rhythm sound, adds thickness and depth to it that I could never get with an EQ.
Currently Being ModeratedJan 10, 2013 7:59 AM (in response to VinnySem)Re: Where to put a BBE Sonic Maximizer with 4CM
I agree with ignoring the haters. There is an assumption that if it sounds like crap the way they used it it is crap.
I don't currently use one with my Line6 X3 Live but I did buy a Sonic Stomp I would like to use with it. That's what brought me to this thread.
I do use a BBE 382i in my metal setup. I play power metal. I run a Boss GX-700 into the BBE into a Marshall EL34 100/100 power amp into a pair of Marshall 1960B 4x12 cabs. It totally kicks butt. The BBE makes a huge difference.
I also use a BBE on my acoustic pedal board. I use the BBE Acoustimax preamp which has a Sonic Maximizer built in. It also makes a huge difference in my sound. I just added a BBE Opto Comp to that setup. It's the perfect compressor for my acoustic setup. It evens things out just enough while remaining effectively transparent.
Currently Being ModeratedJan 11, 2013 3:39 PM (in response to kdog)Re: Where to put a BBE Sonic Maximizer with 4CM
Wow, I'm pleasantly surprised to see more 'nice' things said than 'teasing' and that some of have "seen the light".
I love my BBE Stomp (also run a 422 in my studio).
I run Stomp in the HD500 effects loop. Funny though, on some patches it sounds best when placed very last in the whole chain but on a few, it's best right before the Amp model.
Currently Being ModeratedJan 18, 2013 4:09 PM (in response to sandman69)Re: Where to put a BBE Sonic Maximizer with 4CM
Just for info .... there is a very competent tech over on the JVM Forum who has been doing some detailed circuit analysis on the BBE., He is still chewing on whether there is substance to the claims that are being made for it but the analysis is interesting for those with an interest. Details here --> http://jvmforum.com/phpBB3/viewtopic.php?p=75168#p75168