Currently Being ModeratedJul 25, 2012 9:06 PM (in response to shockwave2k12)Re: assigning a user preset to channel a b c or d
to do that you need the short board, now to do it with your pedal youve got to have 1 on 5c and the other on 5D or its either have 1 on 5C and the other say 6C, try it, but with that switch, youve got to really organize your presets more counciously
Currently Being ModeratedJul 29, 2012 2:06 PM (in response to nicman)Re: assigning a user preset to channel a b c or d
thanks for your reply....the issue is that it doesn;t save the user preference to the channel, i set channel a to 5c and b to say 8b and when i switch back and forth the presets i select are gone....what is the point of this footswitch if i cannot save user presets to a selected channel?......
Currently Being ModeratedAug 8, 2012 1:35 AM (in response to shockwave2k12)Re: assigning a user preset to channel a b c or d
The FBV2 and FBV Express can only select patches within the same bank. To select patches across banks you'll need a footswitch that has bank up/down switching. Even then you would need to switch from bank 5 to bank 8 before you'll be able to change the patches.
Alternatively, relocate your patches to A and B within the same bank and then you'll be able to switch between them using the FBV2.
Currently Being ModeratedAug 7, 2012 7:21 PM (in response to shockwave2k12)Re: assigning a user preset to channel a b c or d
you have to hit save on the amp before changing presets with the footswitch... the footswitch only controls your amp... you need to make your amp do what you want it to do...