Skip navigation
Up to Discussions in XD-V Digital Wireless Microphones
113 Views 3 Replies Latest reply: Aug 19, 2012 6:58 AM by fnando RSS
fnando Just Startin'
fnando
2 posts since
Aug 18, 2012
Currently Being Moderated

Aug 18, 2012 7:17 AM

Line 6 XD-V35l for bass

H there,

 

I have a question, i want to buy a XD-V35L and use it for two things. First, to connect a headset with mini jack connection, and to use in other occasion as my bass guitar wireless system. Any problem with that?

 

Thanks

  • RonMarton Iknowathingortwo
    RonMarton
    357 posts since
    Jan 12, 2012
    Currently Being Moderated
    Aug 18, 2012 3:23 PM (in response to fnando)
    Re: Line 6 XD-V35l for bass

    The differences in impedances, levels and other characteristics between bass and headset are the problem with that, ...when plugging into the single 1/4 inch jack of the TBP06 beltpack.

     

    What you suggest will physically "work", but I doubt that you'd be happy with the sound.

     

    In my opinion, the extra cash for the TBP12 beltpack-equipped XD-V55HS would be money well spent, as it has a multi-pin TA4F input connector, which caters for the different characteristics of instrument pickups by having them wired differently to mics.

     

    The headset would then plug in directly, with the full tone and expression of your bass subsequently being input and transmitted via one of these:

     

    https://www.globalfulfillment.net/gfsnet/(S(whwnxs55jpq24d550ssl3u3m))/line6/10Expand.aspx?ProductCode=97-000-0001

  • dboomer Line 6 Support
    dboomer
    1,997 posts since
    Oct 13, 2008
    Currently Being Moderated
    Aug 18, 2012 4:42 PM (in response to fnando)
    Re: Line 6 XD-V35l for bass

    Hi fnando

     

    No problem with the bass.  If you get the correct wiring for the headset then yes it will work, but it will work to the level of the mic so a lot depends on the sensitivity of the mic.  Line 6 wireless devices are unity devices and the 35 series has no ability to add gain.  Basically they just pass the signal unchanged, so if the signal is too low it will remain too low.

More Like This

  • Retrieving data ...

Bookmarked By (0)