Currently Being ModeratedAug 13, 2012 11:22 PM (in response to fred7sides)Re: recording with usb and pc
yes, I tried successfully.
First: Install the driver an PC or Mac, download it from Line6 Website.
Second: In Cubase, choose Line6 ASIO Driver as Audio Interface.
But: I can't playback from Cubase to the Stagescape. Even when I place a Laptop Icon in my mix, it stays "unconnected" on channels 17 & 18 and there is no playback sound.
And the big issue: Recording quality is extremly bad. It's like a 4bit resolution. A vocal track can hardly be recognized as female or male...
Ticket at Line6 to this Issue is pending.
Currently Being ModeratedAug 14, 2012 4:15 AM (in response to avagabund)Re: recording with usb and pc
After many tries i've finally found the solution !
The install of my driver was ok but the problem was in cubase
After changing the asio driver, i've created new bus (tape f4 to open the window) and then routing the input that i want to record and it works perfectly !
I've got my 8 individual tracks in mono and recorded pre-fader + the main mix in stereo with all effects activate on the mixer
But not found again for the playback in the mixer
Currently Being ModeratedAug 17, 2012 2:45 PM (in response to fred7sides)Re: recording with usb and pc
I hope you both have resolved your problems with recording to computer DAW's with the StageScape M20d. Please be sure to refer to the Recording with StageScape M20d document that we have on our Line 6 Knowledge Base.
The link to this document is below.
Please, let us know if you have any problems, and my apologies it took a week to reply to this post.
Currently Being ModeratedAug 20, 2012 5:57 AM (in response to fred7sides)Re: recording with usb and pc
is there any chance to "play back" all the tracks from the DAW (PC, Samplitute) to the Stagescape Mixer (like it works on the Presonus Mixer).
So i can "mix" all the tracks on the Stagescape? (inline Mixer)
Currently Being ModeratedAug 30, 2012 2:34 AM (in response to dboomer)Re: recording with usb and pc
You seem to be saying that it is possible to play all 16 recorded dry tracks simultaneously back through the mixer from either the SD card or a USB hard drive (whatever they were recorded on) for a post-production mixing.
If this is so, how can the new mix then be recorded? Could it be recorded to a USB flash drive or to a computer?
Currently Being ModeratedSep 10, 2012 3:57 PM (in response to loring)Re: recording with usb and pc
What I do is use the SD card, I import the 16 traks or less recorded on stagescape to my Daw and mix everything there! Don't know if that´s what you are asking for...cheers! So..I think if you do the oposite with the same sample rate and resolution you will be able to mix it in the stage scape!
Currently Being ModeratedSep 12, 2012 8:44 AM (in response to loring)Re: recording with usb and pc
As i understand the Recording and Playback from SD card or USB drive, you can either record or play.
So if you have recordet 16 tracks and play them, you only can mix them to hear it at the Analog outputs. It seems that there is no way to record the outputs to SD card or USB drive while playing.
But im not sure if you can record it with a computer connected over USB. Try to record the Chanel 19/20
Currently Being ModeratedAug 30, 2012 7:24 AM (in response to negatiefmann)Re: recording with usb and pc
hmmm... my m-audio interface has 8 outputs. if i recorded something with that m-audio card to my daw, maybe i could route the single tracks back to the outputs of the m-audio (1-8), connect them to the m20d and record them to the m20d's sd card. with killing all the effects and settings in the daw, the dry signals will now get to the m20d. sounds a bit complicated but... GOT IT?! :-D :-D :-D