Oct 21, 2012 12:47 PM
Need some help in EQing
-
Like (0)
Hello there, I have made a preset in my POD HD500 for Killswitch Engage, but I feel the tone need some EQ.
I do not have any idea about EQing and do not know what kind of equalizer/position of equalizer that I must add.
I would be thankful if someone can help me getting it right.
http://line6.com/customtone/tone/221284/
Regards,
Edit: Guitar is ESP LTD MH-1000FR/EMG PU
It would be better if you could post a clip demonstrating, with your guitar and pickups, what the problem is. Tone file sharing is great and all, but without your specific setup we're just guessing.
You are right. My guitar isESP LTD MH-1000FR/ EMG PU
I use POD HD500 and reaper. I will try to record a track and upload it here.
Anyway, basic ideas about EQing to get a metal tone can be helpful.
Thank you!
i brief but on topix:
Thank you for the site seems useful and well done!
I'm trying to get a metalcore tone same as Andy James' tone. Can I get it using the POD HD500 and the guide in website above? I have tried some of the metalcore patches from the website, but they are not close for the tone that I want. I do not know how to describe the characteristics of his tone. It is in the link http://www.youtube.com/watch?v=2TvB7sUO5gc
I hope you can help me getting that tone since you are professional user of the POD HD500.
Sorry for burdening you.
Edit: Sound recording has been uploaded using the POD HD500 preset as a an attempt to get a metalcore tone like Andy's tone.
I have uploaded mp3 as a tone test. Please check it and guide me to the good metalcore tone similar to Andy James' tone.
hey man, several problems i'm seeing in your patch.
1) Noise Gate is set up high. The standard "Noise Gate" is not just a gate, it's a "noise reducer" and can suck tone when Threshold is as high as you have it. Use a Hard Gate for a true gate without tone suck.
2) Screamer settings seem crazy. With the EMG-81 I assume you have in the bridge (which I'm assuming you're using for your rhythm tone), you should have a high output, bright tone. From the clips I listened to, I would have guessed you had a Fred or something dark as your pickup. Your Screamer settings are making the patch way too dark. I would leave Bass at 50% or lower it maybe to 40%. But really, the Bass/Treble settings don't even exist on a real Screamer. The Tone knob is what everyone uses to get their ideal filter tone. Start with Bass, Treble, and Tone at 50% and move tone up and down until things start sounding where you want them.
3) Everything has too much gain. You shouldn't need that much at all. Usually people use a Screamer or boost pedal in front with 0% to 15% Drive - that keeps the pedal from adding distortion, just a bit of compression. It acts as a filter/mids-boost, which causes your amp to distort differently - tighter and more focused. I suggest starting with 0% Drive, 100% output, and then toying with the amp Drive starting at 50%.
4) Input Settings Guitar+Aux means you're getting the noise of Aux into your tone. Set Input 1 to just guitar. Set Input 2 to Variax.
5) Why do you want to use Dual Amps? I'm not a fan of this - I find they interfere with each other more than anything. I see you have them panned hard left/right. I would focus on one good mono tone first. Then make another. If you want them on the same track, record them separately. True double-tracking always sounds better than panning 2 tones hard left/right.
6) Why are you using the "pre" models? If you're trying for a direct tone, you will probably prefer the "full" models - they have more bite and aggression to my ear.
I cover all of these topics in the guide I linked you to. At the top and bottom of the page are links back to the table of contents. Go there, and you can access everything in-depth. Or just read through the "quick guide" page. It's labeled II. Quick Guide.
and here's my last killswitch patch:
http://foobazaar.com/podhd/patches/modernMetal/KillswitchEngage/MM_KSE_0420.h5e
it needs an update, but it's pretty good as is.
I appreciate your notes. I believe that you are understanding what I'm trying to achieve.
I use the pre models because I have tried the full models and I have found them noisy and lacking djenty. Perhaps, I could not tweak them correctly.
I will try to tweak the patch that i have paid according to your notes and guide. Also, I will try your KSE patch. I'm trying to get a tone similar to that one in their song "The End of Heartache". Hopefully, it is meant in your patch
.
Stay in the mix and in the know.
Latest offers, special deals and insider updates.