Currently Being ModeratedOct 26, 2010 4:09 PM (in response to mike-w)RE: X3 Live/DT-50 Midi Control
MIDI implementation on the DT50 amps is not yet available as the amp is not available either, so this is current speculation.
1) You should be able to switch between channels A and B on the amp via MIDI, however, implementation as to what the POD X3 Live will control is not available.
2) Not sure what 'on up' means just yet as full MIDI implementation is not (publicly) available yet.
3) The signal chain will still be whatever manner you choose to connect the POD to the DT50. The MIDI connection does not provide an alternate signal chain. If you choose to have the POD in front of the amp, that would be: Guitar->POD->DT50. Whichever inputs or connection configuration you choose to use will still be the same as any other amp.
4) Not sure what kind of MIDI info the DT50 will send to the POD at this time as implementation is not available at this time for this unreleased product.
Currently Being ModeratedDec 4, 2012 5:03 AM (in response to mike-w)Re: RE: X3 Live/DT-50 Midi Control
none of the pod's work as a midi interface... you will need to pick up a seperate interface...
i'd recommend the m-audio UNO...
but i have successfully updated with the cheap 5$ usb/midi cable from ebay, just not as reliable.