Currently Being ModeratedDec 14, 2012 1:10 PM (in response to ay8kjqtz2)Re: How to set M5 to send MIDI PC commands to a second M5?
When you select a preset on the M5, the MIDI PC message associated with that preset is sent from the MIDI out. As long as you have a MIDI cable going from the MIDI out of the M5 you want to use as the master to the MIDI in of the one you want to use as a slave, that's all you'd have to do (make sure they're set to the same MIDI channel, of course). You can't change the MIDI mapping of the pedals, though. It is what it is.
Also, one caveat. The M5 also sends a CC when you turn the effect on or off within the preset, and that will affect the effect within the preset on the other M5 as well. Same thing goes for the expression pedal. If you have an expression pedal attached to the master M5, it will control the expression pedal parameter of the slave.
Currently Being ModeratedDec 14, 2012 2:08 PM (in response to phil_m)Re: How to set M5 to send MIDI PC commands to a second M5?
Cool, thanks. IT looks like I may need to play around a little to figure out how (or if) to implement this, but you've helped a lot!