Currently Being ModeratedJan 11, 2013 10:15 AM (in response to shmelman)Re: L6 Link capabilities concernig FX Loop, Controlknobs and Preamps
1) With an internal preamp active the HD500 takes over Channel A of the DT and provides the Pre-Amp
2) With an HD preamp active you can control the tonal settings by either the HD500 knobs itself or also on the amp. They work in tandem.
3) If you disable the PreAmp model in the HD500 the DT automatically switches to Channel B and you get the internal DT preamp there. The Efx that have been placed in the chain of the HD500 are still available so in this case (preamp de-actived), you have an efx pedalbord with the DT's preamp.
4) With regards to the efx loop question ..... not sure. Someone else will answer no doubt.
Currently Being ModeratedJan 12, 2013 7:26 PM (in response to shmelman)Re: L6 Link capabilities concernig FX Loop, Controlknobs and Preamps
Response to 3 part 2: No, it is separate. You have two loops in that case. The one on the DT is always post amp model and is always on just pre the power section of the amp.