Community: FLEXTONE III FACTORY RESET

Up to Discussions in Flextone I / II / III / Duoverb / HD147

3533 Views 6 Replies Latest reply: Jan 29, 2013 4:22 PM by spaceatl

guitarmagix

2 posts since
Jul 27, 2009

Currently Being Moderated

Jul 27, 2009 6:30 PM

FLEXTONE III FACTORY RESET

I want to perform a total factory reset of a Flextone III plus amp. I want to reset all channel memories, firmware, amp defaults and so on. How I can do that ? Thanks.

Like (0)

Crusty_Old_Rocker
3,096 posts since
Jan 24, 2007

Currently Being Moderated

Jul 27, 2009 6:37 PM (in response to guitarmagix)
Re: FLEXTONE III FACTORY RESET

Flextone III: hold the A and D Buttons while powering up for 8 seconds.

Cheers,

Crusty

Report Abuse

Like (0)
- guitarmagix
  2 posts since
  Jul 27, 2009
  
  Currently Being Moderated
  
  Jul 30, 2009 12:50 PM (in response to Crusty_Old_Rocker)
  Re: FLEXTONE III FACTORY RESET
  
  Thank you Crusty ! And many thanks to Miller too !
  
  Report Abuse
  
  Like (0)
ricksox
11,600 posts since
Mar 28, 2006

Currently Being Moderated

Jul 28, 2009 11:27 AM (in response to guitarmagix)
Re: FLEXTONE III FACTORY RESET

Correct. Thanks Crusty!

Line6Miller

Report Abuse

Like (0)
griphon2
2 posts since
May 4, 2009

Currently Being Moderated

Jul 31, 2009 4:43 PM (in response to guitarmagix)
Re: FLEXTONE III FACTORY RESET

I'm not sure about how to ask this. When I do this (reset), I have a dead amp (normal, no access to Line 6, if that's clear, it also appears as if the memory shorts. I can't have six bad cords... I don't...) . This is or was a pawn shop amp. I think it's memory needs to be cleared or reinstalled. I don't know how to do that. Help me, good folks...
TR~

Report Abuse

Like (0)
SteveAIT
3 posts since
Aug 25, 2008

Currently Being Moderated

Jan 29, 2013 2:54 PM (in response to guitarmagix)
Re: FLEXTONE III FACTORY RESET

I have a Fextone III here in our shop that powers up, all 4 channel switch lights, gate and comp lights stay on and the tap tempo light flashes. After a few min the lights go on and off randomly. I tried the rest procedure, holding down the A and D channel buttons for 8 seconds and longer while turning on the power switch and nothing changes. Any advise?? You can email me at srrait@aol.com. Thanks!!
Steve

Report Abuse

Like (0)
- spaceatl
  4,456 posts since
  Jan 24, 2007
  
  Currently Being Moderated
  
  Jan 29, 2013 4:22 PM (in response to SteveAIT)
  Re: FLEXTONE III FACTORY RESET
  
  I had to dig for this one...Man, this is an old thread...
  
  You can boot the Flextone III into a safe-mode holding A on power up. Open the Monkey and flash the firmware...This doesn't really seem like a bricked amp though...Anyhoo, probably worth a shot...
  
  http://line6.com/support/message/56846
  
  Report Abuse
  
  Like (0)

Go to original post

Legend

Correct Answers - 5 points
Helpful Answers - 3 points

About
- Line 6 Story
- News
- Press
- Jobs
- Support
- Contact Us
Follow

Stay in the mix and in the know.
Subscribe

Latest offers, special deals and insider updates.

Jul 27, 2009 6:30 PM

FLEXTONE III FACTORY RESET

Actions

More Like This

Bookmarked By (0)

Legend

About

Follow

Subscribe