Currently Being ModeratedFeb 11, 2013 12:47 AM (in response to PavsterBG)Re: how to set up pod xt live with PA
maybe your problem has been solved already and you needn`t bother with my answer, but if you still need help, I hope I can deliver ..=)
here`s what I`d suggest: Connect the pod xt live to a stereo DI Box (a passive one will do) and then send the signal from this DI Box via 2 XLR cables to the mixing console. thus the pod is connected to the XLR inputs of the mixer. Now you need to play around with the gain controls until you get the desired sound. From my experience the clean sound will sound better with more gain, while the overdrive/crunchy sounds need less gain. so you have to find a compromise between these two. The EQ of the mixing console stays more or less flat. Don `t forget to make sure the output volume of your pod is on maximum, the amp/line switch is on line. In my live set-up I link the pod via link- out of the DI Box to a small (4 channel) mixer (line input) and from there out to two full range active floor monitors. then you are very close to the headphone sound, not only on the PA, but also for yourself.
Hoping to have helped you....