Currently Being ModeratedJan 23, 2012 3:01 AM (in response to roesler13)Re: Pod HD Dry input (DAW)
If I understand what you are trying to do ...
You could make a dual channel patch with a modelled amp and effects on the 'left' side and no effects or amp on the 'right'. Pan the mixer left and right within the HD. Then record the left output to one channel on your recorder and the right output to another. That way you have your clean, uneffected take and your processed take.
Does that sound like a goer or am I misundertanding?
Currently Being ModeratedJan 23, 2012 11:18 AM (in response to jimsreynolds)Re: Pod HD Dry input (DAW)
I think you can also use the S/PDIF output as dry even with a normal signal. This requires you use an additional sound card with S/PDIF inputs. Some motherboards include that these days, though the latency is probably crap on those.
I'd pick up a used Toneport UX8 or even a cheap alternative brand and you'll be good to go.
Currently Being ModeratedFeb 9, 2012 11:00 AM (in response to roesler13)Re: Pod HD Dry input (DAW)
+1 to jimsreynolds and guitars69,
The SPDIF out can send only a dry signal or you can create a dual tone and keep one side of the patch "clean". Both option would leave a dry signal so you can use plugins later.
Line 6 Customer Support
Currently Being ModeratedFeb 14, 2012 2:25 PM (in response to roesler13)Re: Pod HD Dry input (DAW)
You can use Pod Farm.
Or you can use the HD device itself to reamp the dry signal but you will need a seperate multi-channel audio interface to your DAW while using the HD analog audio inputs and outputs.
Currently Being ModeratedFeb 27, 2013 4:49 AM (in response to roesler13)Re: Pod HD Dry input (DAW)
Hi, i have pod hd bean, and i'm facing the same problem now, i want to record a clean guitar and then with the pod hd while i'm hearing the recorded guitar make my sound. Is there a way? and if so is there an analytical guide how im going to do this?
Thank you in advance