Nov 1, 2009 1:06 PM
LINE 6 DM4 Battery Power not working
-
Like (0)
i own 2 of these pedals and when i put in batteries the pedal does not work. I checked the battery connectors and they receive power and the power goes into the board but for some reason the pedal doesnt work
This is the first time i tried using pedals for this baby
???
please send a reply to fordavidz@gmail.com as well
thank you David
David,
Does the pedal work with a PX-2 power supply? Make sure you remove batteries when using with a power supply. You can try resetting the pedal by holding the 'A' and 'D' footswitches as you power on the pedal by plugging a 1/4" cable into the Left/mono Input.
If the problem persists, you will need to take it to an authorized service center to take a look:
http://www.line6.com/support/serviceCenters/
Regards,
Line6Hugo
the pedal works great with the power supply and the batteries are alwats out. They have never leaked. this is the first time i tried using batteries oon both pedals and both dont work
if i reset my pedal will i loose my delay settings that i have saved?
Yes, Delay settings will be lost from the reset. If the problem persists, it will need to be taken to a service center.
Regards,
Line6Hugo
Hello,
It's been a few days since we've heard from you. We're going to assume your question has been answered and close this thread. If you still have questions please feel free to open a new question with us and we will answer your questions accordingly. Thanks!
Regards,
Line6Hugo
Stay in the mix and in the know.
Latest offers, special deals and insider updates.