Community: How do I route input1 and 2 to seperate line outputs?

Up to Discussions in POD HD

621 Views 5 Replies Latest reply: Dec 18, 2010 11:56 AM by albertpike2000

albertpike2000

37 posts since
Feb 12, 2010

Currently Being Moderated

Dec 18, 2010 11:32 AM

How do I route input1 and 2 to seperate line outputs?

Hey

I am selecting input 1 guitar only; input 2 aux only. I am trying to use the mixer to pan these input one to the left line output and input 2 to the right line output. Is this possible. I want these to go to seperate amp channels.

Sorry if this has been covered, I don't seem to have luck trying to search the forums.

Thanks

Like (0)

Rowbi
7,745 posts since
Nov 25, 2006

Currently Being Moderated

Dec 18, 2010 11:38 AM (in response to albertpike2000)
Re: How do I route input1 and 2 to seperate line outputs?

Yes I think that's possible..
Are you saying you tried it but it didn't work?

Report Abuse

Like (0)
- albertpike2000
  37 posts since
  Feb 12, 2010
  
  Currently Being Moderated
  
  Dec 18, 2010 11:45 AM (in response to Rowbi)
  Re: How do I route input1 and 2 to seperate line outputs?
  
  Yes. No matter how I adjust the mixer both R and L line outputs are seeing what seems to be a summed signal. I can adjust the volume of each input but panning left does not take the signal out of the right ouput and vice versa.
  
  Report Abuse
  
  Like (0)
  - albertpike2000
    37 posts since
    Feb 12, 2010
    
    Currently Being Moderated
    
    Dec 18, 2010 11:53 AM (in response to albertpike2000)
    Re: How do I route input1 and 2 to seperate line outputs?
    
    The above has been corrected
    To clarify, I'm talking about the 1/4" OUT
    
    Report Abuse
    
    Like (0)
    - Nick_Mattocks
      9,065 posts since
      Mar 26, 2007
      
      Currently Being Moderated
      
      Dec 18, 2010 11:49 AM (in response to albertpike2000)
      Re: How do I route input1 and 2 to seperate line outputs?
      
      Yes - definitely possible. Panning is the answer along with two distinctly separate signal paths. Remember the XLR outs are always panned left and right but if you use only one of the 1/4" outs then it will be summed to mono - you have to use both 1/4" outs for stereo or to separate the signal paths. Also ensure any effects you use on both signal paths are true stereo - some aren't and will sum the signal
      
      Post your patch here and I'll take a look if you wish
      
      Nick
      
      Report Abuse
      
      Like (0)
      - albertpike2000
        37 posts since
        Feb 12, 2010
        
        Currently Being Moderated
        
        Dec 18, 2010 11:56 AM (in response to Nick_Mattocks)
        Re: How do I route input1 and 2 to seperate line outputs?
        
        OK. I see a few possible problems then. I don't have both outs plugged in, just switching back and forth with the phone plug; and I have some mono effects in the chain.
        Thanks, I'll try again.
        
        Report Abuse
        
        Like (0)

Go to original post

About
- Line 6 Story
- News
- Press
- Jobs
- Support
- Contact Us
Follow

Stay in the mix and in the know.
Subscribe

Latest offers, special deals and insider updates.

Dec 18, 2010 11:32 AM

How do I route input1 and 2 to seperate line outputs?

Actions

More Like This

Bookmarked By (0)

About

Follow

Subscribe