Currently Being ModeratedOct 12, 2011 3:46 PM (in response to randallp)RE: Help with MIDI control of Bypass and Program select please?
There two things I would suggest:
You might want to try using CC77 with a value between 0-63 to bypass the effect instead.
The other option is use the MIDI command and manually disengage the bypass on the hardware yourself instead, and then rewind to the beginning and replay to see if the first program change will work.
Currently Being ModeratedOct 20, 2011 6:19 PM (in response to Line6Don)Re: RE: Help with MIDI control of Bypass and Program select please?
It's working now but I'm not sure why! (Don't you just hate it when that happens!)
I think CC77 and 0-63 was the key.
Not sure what the difference is between the PC Enable Bypass and CC Bypass Button but I need to spend more time on this.
Again, thanks for the help and to Line 6 for such good legacy support. Encouraging theses days. Quality.
I'll post again when I've got a good solution.
Currently Being ModeratedOct 21, 2011 6:56 AM (in response to randallp)Re: RE: Help with MIDI control of Bypass and Program select please?
Still on the bypass from MIDI - I'm getting somewhere with setting up a Behringer FCB1010 to operate the Echo Pro but have a problem setting a pedal to toggle the bypass on/off. Can you check I'm doing it right?
I've set a pedal to send CC 77 value 0 which has no effect. I monitor the midi out from the FCB1010 and it seems ok - it interprets 77 as Vibrato Depth 0.
Do I have to send PC 0 enable bypass first I wonder?
Any pointers welcome.
How do peeps just enable/disable echo using the EP? Maybe I should think about MIX?