Currently Being ModeratedMar 19, 2012 10:58 AM (in response to TYancy)Re: Firmware update killed audio
Did you try disconnecting and reconnecting the Mobile In to your iOS device after the update finished?
Does the light on the your Mobile In blink when you connect it?
Do you have access to another iOS device so you can see if another iOS device can recognize the unit?
Check your iPhone or iPad to be sure the latest version of the iOS operating system is installed update if necessary, instructions to do so can be found here. Check Settings > General > Accessibility, and then turn Mono Audio off. If the adaptor is still not being recognized by your Apple® device, it may be necessary to backup and restore your current iOS installation using Apple®’s instructions located here.
Currently Being ModeratedAug 8, 2012 1:52 AM (in response to Line6Don)Re: Firmware update killed audio
Same story here,
Iphone 4, 5.0.1, did the firmware update, everything went good.
Firmware update happened before mobile pod update
- Mobile in is not recognized by mobile pod.
- Garage band shows the plug sign, but no sound can be heard. Monitoring shows incoming signal. Recording with GB works, but sound is crappy.
Once connected mobile in blinks short, much shorter then before update.