Skip navigation
Up to Discussions in POD HD
670 Views 4 Replies Latest reply: Nov 29, 2012 1:07 AM by axus73 RSS
axus73 Just Startin'
axus73
29 posts since
Apr 4, 2012
Currently Being Moderated

Nov 24, 2012 5:02 AM

Pod hd 500 and tube amp

Hi guys!

I own a blackstar ht 50 tube head and some pedals (coca comp, big muff, OCD, electric mistress) and i have tried the 4cm method but with poor results.

I followed Jim's guide and tried various tweaks but i prefer what i hear in my headphones with pod's simulations

The fact is i do not really like my amp overdrive channel and so i am looking to try the simple connection bypassing amp's preamp, using pod's simulations and amp's Final.

So my chain would be'

Guitar

Distorsions, comp (real stomps)

Pod's in

Mistress in pod's effects loop

Amp

 

Should I connect pod's out in amp input or fx return?

 

Is this counfiguration working in your opinion and not coloring tones too much?? Any suggested tweaks for patches?

 

Thank you all!

Tags: pod, amp, tube
  • joel_brown Just Startin'
    joel_brown
    90 posts since
    Nov 26, 2006
    Currently Being Moderated
    Nov 24, 2012 6:22 AM (in response to axus73)
    Re: Pod hd 500 and tube amp

    I use the PODHD into the Effect Returns of a pair of Marshall JCM900 heads which bypasses the pre-amps completely.  I use the Studio Direct setting on the PODHD.  It's the only way that works for me. 

    • axus73 Just Startin'
      axus73
      29 posts since
      Apr 4, 2012
      Currently Being Moderated
      Nov 25, 2012 2:13 AM (in response to joel_brown)
      Re: Pod hd 500 and tube amp

      Ok.

      Are there any issues I should keep in mind for patches?

      I am referring to the stereo/mono signal routing inside the pod.

      I have attached an image of my actual patch. Do you think the signal coming out from my amp speaker would be optimal with a patch tweaked this way?

      Attachments:
      • JTSC777 Just Startin'
        JTSC777
        63 posts since
        Jun 22, 2012
        Currently Being Moderated
        Nov 26, 2012 9:40 PM (in response to axus73)
        Re: Pod hd 500 and tube amp

        Line 6 HD300 into effect loop return of Egnater Tweaker or Fender BDRI. No external pedals. Used this way these things kill live! A tube power section does make quite a difference but heck my HD300 sounds great into the effect return of my original Flextone single twelve with a Delta 12A speaker in it. Good Luck!

        • axus73 Just Startin'
          axus73
          29 posts since
          Apr 4, 2012
          Currently Being Moderated
          Nov 29, 2012 1:07 AM (in response to JTSC777)
          Re: Pod hd 500 and tube amp

          Gwoshhh...

          Yesterday night, after having tweaked my best Gilmour patch ever with the rig attached, using headphones and reaper I went to a gig session with the band.

          I wanted to try direct connection in my blackstar ht 50 head so I detached all the cables and running just a single cable from my pod output into amp fx return....

          No sound coming out of the speaker.

          Tried into front input...

          Nothing

          Tried into fx return with another cable into amp input going nowhere...

          Nothing

          Tried guitar direct into input and it sounded.

          I really cannot describe my frustration...I almost wanted to put some gasoline and give all to fire!

           

          And what's more, after giving up trying, I tried to connect direct to the mixer via xlr but again...nothing.

          Other patches sounded but the one I tweaked no...strange thing SOUNDED WITH POD'S TUNER ENGAGED.

           

          Have to gather thoughts and review everything. Thank for your help!

          Attachments:

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • Correct Answers - 5 points
  • Helpful Answers - 3 points