-
Like (0)
-
Currently Being ModeratedJan 16, 2013 3:45 PM (in response to Idlesoul)Re: Need a little help, i've got 2 bogner hd 100's and one shortboard, need to control both
i think you can get the idea's you need here: http://line6.com/support/message/23267#23267
- Report Abuse
-
Like (0)
-
Currently Being ModeratedJan 18, 2013 7:59 PM (in response to TheRealZap)Re: Need a little help, i've got 2 bogner hd 100's and one shortboard, need to control both
Thanks for your reply, but I saw that Idea before, don't care much for it. Is there anyway to just make a "y" box with one input from the floorboard and then 2 outputs, one to each head? Just asking, Idk if it will work or not, but maybe you might. Thanks, by the way incase you need to know both heads are the mk1's, thanks for any input you might have on this idea about the "y" box
Message was edited by: Idlesoul
Message was edited by: Idlesoul
- Report Abuse
-
Like (0)
-
Currently Being ModeratedJan 18, 2013 8:35 PM (in response to Idlesoul)Re: Need a little help, i've got 2 bogner hd 100's and one shortboard, need to control both
hmmm.....That's exactly what that thread is...RJ45 Y that you can buy off the shelf at Fry's...You do have to clip all but one wire, but it works to run two SV MK1's from one short board...I put the Y on the back the amp so I could run one wire to the FBV and one to the other amp...Practically a bit easier at a gig than two long wires coming from the FBV...
Zap's link seems to come up part way thru the thread...maybe this makes more sense if you missed the first page...
- Report Abuse
-
Like (0)
Actions
More Like This
- Retrieving data ...
Legend
- Correct Answers - 5 points
- Helpful Answers - 3 points
-
About
-
Follow
Stay in the mix and in the know.
Subscribe
Latest offers, special deals and insider updates.