These forums are read only, please use our new forums here.

Main :: M5 / M9 / M13



Line6 M5 Power Supply
by maktub2 on 2012-02-05 14:54:37

Hello Line6,

I recentrly "lost" my M5 Power Supply and I need to replace it.

Can I replace it with the DC-1? Or do I need to use the DC-1G?

Please let me know.

Thank you so much in advance.



Re: Line6 M5 Power Supply
by phil_m on 2012-02-06 07:10:21

The power supply the M5 comes with isn't either of those ones, I believe. But there's nothing really that special about it. It's center negative 9V DC power supply rated at 500mA. As long the replacement power supply you get meets or exceeds these specs, you'll be fine.



Re: Line6 M5 Power Supply
by maktub2 on 2012-02-06 08:46:06

So I could saffly use the DC-1 insted of DC-1G Right? I am a little worry about this chart:

http://line6.com/support/docs/DOC-4269

">http://line6.com/support/docs/DOC-4269">http://line6.com/support/docs/DOC-4269



Re: Line6 M5 Power Supply
by maktub2 on 2012-02-06 08:59:14

Can I use de DUNLOP DC-BRICK to supply the M5? and or the Wireless Relay G30?



Re: Line6 M5 Power Supply
by phil_m on 2012-02-06 09:02:17

Actually, the DC-1g will work. The DC-1 won't. You need 500mA (well, actually you probably need something closer to 400mA, but the official power supply is rated to 500mA.)




The information above may not be current, and you should direct questions to the current forum or review the manual.