Valid product registration or software purchase required to use CustomTone.

TONE NAME: Fletcher Munson

  • Created with: Helix
  • Author:
  • Guitarist:
    Fletcher Munson
  • Style:
  • Date: 8/11/16
  • Downloads: 1919
  • Addons:

    Model Packs increase the number of Amp or FX Models of a GuitarPort, TonePort, PODxt, PODxt Live or PODxt Pro, for a wider variety of tone possibilities. When a particular tone in the library relies on a Model available in one of these packs, you'll see symbol(s) to indicate which Packs: MS (Metal Shop), CC (Classics Collection), FX (FX Junkie), and PP (Power Pack).

    The models within the FX Junkie Model Pack are already included in PODxt Live, and offered for purchase to add-on to GuitarPort, TonePort, PODxt and PODxt Pro.

    Variax is the uniquely flexibile guitar from Line 6. Our Vetta II amplifier includes a digital connection for the Variax that lets you store settings for both your amp and your guitar in the Vetta II so that when you call up a Vetta Channel Memory your amp and guitar can change sounds together. Vetta II Tones marked with this guitar symbol include this Variax data.

    For each tone in the library, you'll see an icon for either a single coil or humbucker pickup. This tells you whether the tone is best for use with a single coil pickup or a humbucker, so you can select the appropriate pickup on your guitar when using this tone.

    Attention POD 2.0, Flextone and HD147 owners... Your hardware doesn't do Stomp effects, so you'll hear something different than what was intended. Try increasing the Drive or choose a higher gain Amp Model to get the right sound. The other aspects of the sound should translate as expected, so you'll at least get a great starting place for tweaking.

  • Comments:
    NOTE! These are mono. you can create stereo EQ blocks if needed. This is a utility patch that contains 4 blocks that can be used to compensate for the effects of listening to a tone at high or lower/bedroom volume. If you CREATE a tone at low volume (i.e. ~60dB), but want it to sound "good" at high volume, use one of the fist two blocks at the end of your signal chain to simulate the response of a higher volume scenario. Adjust the patch to sound good with the EQ on - and just delete it or turn it off when you PLAY at full volume. If you CREATE a patch at high volume (i.e. ~100dB) - use one of the second set of two EQ blocks in the same way - and just turn the EQ off when you PLAY at low volumes. The first block is a more aggressive compensation based on a blend of Fletcher/Munson data and ISO standards. The second is a little less extreme.

Tone successfully deleted

Delete this tone forever?

Yes / No
There was a problem deleting the tone.


Tones contributed by users to the Public Tone Exchange are made by individual users, who are in no way affiliated with Line 6. Any product name or trademarks used by the users to describe their Tones are the sole property of their respective owners. Any use of these product names or trademarks of other manufacturers should not be construed as an endorsement, association or affiliation with Line 6.