Tone Details

Tone Name Treadplate Pre
Created with POD HD500
Author Brazzy
Guitarist
Song
Band
Amp Treadplate Pre
Guitar
Tuning
Style
Comments
Using the latest flash update 2.10 and set the Mode to Combo Front, Focus to 670hz, and Low & Highs to -50. Then I set the patch like Meambobo's Guide suggested. Setting up the patch in path A, muting path B and panning path A to center. Then I put Mod, Delay and Reverb after the mixer and have Input 1 source set to Guitar and Input 2 source set to Variax. The guitar in Z is set to Auto. Usually I use the Dynamics and Distortions before the amp in Path A. The PAD/Normal switch next to the pedal is set to PAD but sometimes I switch it depending on the guitar I use. Also the 1/4" Line/Amp switch next to the pedal is set to Amp. I use Amp Pre's often unless I use the Studio Direct into Headphones and/or use the XLR into the Spider Jam Mic section sometimes I use the Aux input on the Spider Jam. I've even tried using the Headphones out on the HD500 into the MP3/CD input on the Spider Jam witch sounded good also. I usually do not use a Cab model so that's set to "No Cab". Most of the time the amp volume is almost full open and tweak the drive turning the volume down if needed. The Master Volume is full open and I always set a volume pedal at the end of the chain. With the Spider Jam I normally go guitar in, set the Amp to a clean channel. The Drive knob to 12 O'clock, the Tone stack knobs to 12 O'clock, Channel Volume to 12 O'clock, No effects, and the Master to 12 O'clock.
Date 11/5/13
Downloads 231
POD HD500

Treadplate Pre





Model Packs increase the number of Amp or FX Models of a GuitarPort, TonePort, PODxt, PODxt Live or PODxt Pro, for a wider variety of tone possibilities. When a particular tone in the library relies on a Model available in one of these packs, you'll see symbol(s) to indicate which Packs: MS (Metal Shop), CC (Classics Collection), FX (FX Junkie), and PP (Power Pack).

The models within the FX Junkie Model Pack are already included in PODxt Live, and offered for purchase to add-on to GuitarPort, TonePort, PODxt and PODxt Pro.

Variax is the uniquely flexibile guitar from Line 6. Our Vetta II amplifier includes a digital connection for the Variax that lets you store settings for both your amp and your guitar in the Vetta II so that when you call up a Vetta Channel Memory your amp and guitar can change sounds together. Vetta II Tones marked with this guitar symbol include this Variax data.

For each tone in the library, you'll see an icon for either a single coil or humbucker pickup. This tells you whether the tone is best for use with a single coil pickup or a humbucker, so you can select the appropriate pickup on your guitar when using this tone.

Attention POD 2.0, Flextone and HD147 owners... Your hardware doesn't do Stomp effects, so you'll hear something different than what was intended. Try increasing the Drive or choose a higher gain Amp Model to get the right sound. The other aspects of the sound should translate as expected, so you'll at least get a great starting place for tweaking.

Tone successfully deleted

 
Delete this tone forever?

Yes / No
There was a problem deleting the tone.

Close

Tones contributed by users to the Public Tone Exchange are made by individual users, who are in no way affiliated with Line 6. Any product name or trademarks used by the users to describe their Tones are the sole property of their respective owners. Any use of these product names or trademarks of other manufacturers should not be construed as an endorsement, association or affiliation with Line 6.