adflaker

The only close to official word is on Sweetwater's website. "Estimated December 2026" is what it says now, but it's also said March, then June, then October at various points this year, I believe. Not official, but Eric Klein said something similar in a thread on the gear forum: https://thegearforum.com/threads/digital-igloo-eric-klein-ygg.198/post-502029 According to that post, there's apparently a louder subset of Stadium users than those of us growing impatient about Variax compatibility. I find that hard to believe. :-D

The only thing "special" about the port on the stadium is its ability to accept what's called an Ethercon connector (if what you say about using a Cat6 cable is correct). It's basically a latching protective cover that wraps around an ordinary ethernet cable. A regular ethernet cable will still work fine in an Ethercon port. If the D10 doesn't come with a cable, you can either use a regular one or buy a cable with an Ethercon connector on one end and a regular ethernet connector at the other (found one linked below). https://www.markertek.com/product/ec8-rj45-3/laird-ec8-rj45-cat5e-tactical-ethernet-cable-neutrik-ethercon-rj45-to-rj45-black-3-foot?gad_source=1&gad_campaignid=21341166847&gbraid=0AAAAAD_iEPjylN5jY8azIDkX2GOjTSiGP

https://line6.com/company/contact/productfeedback/ is where you can submit feedback/feature requests.

Hate to make it worse for you, but Sweetwater is now saying expected in December. I'm pretty bummed about this, too. I've never owned any piece of gear as long as my JTV, and I can't use it anywhere near as much as I would like because of battery sourcing issues (you can't find an official battery any more, and I'd rather not risk frying the electronics with something from Amazon). Every pushed back date makes me a little bit more sad.

Ha...I searched first, and found...one thread that mentions it. Either the search function is broken or it's talked about way more outside this forum than it is here. It's become my standard practice now that anything I use the official feedback form for, I'll drop a link to the form here as a gentle reminder that Line 6 doesn't officially monitor this forum for Bug Reports or Feedback, and anybody that finds my idea useful can officially request it. Sorry if it annoyed you.

I know it's been discussed by Eric in interviews as a "maybe" (and it sounds to me like a "probably" from some of the interviews I've seen), but I feel like the more requests for NAM support, the more likely Line 6 might be pushed to include/finish it. I already submitted a feedback form. Anyone else interested can do so here.

Ah...I assumed that clones had a static DSP requirement anyways like impulse responses (just obviously a much higher static requirement). Haven't done a deep dive into them yet, but I'd be interested to see if you can get yourself into a DSP situation where some clones are greyed out on the selection list like other amps/effects are when you try to select them.

Already submitted a feature request to Line 6 here, but wanted to post about it here in case anyone agrees and wants to request it as well. I love that they made Impulse Responses available to change with snapshots. It would be great if they would do the same for Proxy clones. Trying to cram all the effects for specific sounds along with clean and overdrive amp clones can get pretty DSP intensive sometimes. I just watched a Jason Sadites YouTube video where he was scrolling through a bunch of his proxy clones, and the audio drop out while "loading" the new clone didn't seem overly long to me. I'd be fine with that momentary switching silence to toggle proxy clones with a new snapshot.

In case it doesn't start at the "Stadium Native" question, fast forward to 3:18

Yeah, I had a similar issue (thread here). I noticed while sending pictures to support that this only seems to happen with block toggle switches. Any switch that's set to adjust parameters is unaffected.

Already submitted the feedback form, but thought if anyone else thinks it's a good idea, they can submit one as well. Strength in numbers, you know... I think it would be awesome if we could set up scribble strips to mimic the behavior of the Mode Selector strip on FS6 with two separate sections that can be selectively highlighted. It would be super useful for things like: multichannel amps (CH1 on one side and CH2 on the other side, etc.) Delay (Short vs. Long) Reverb (Large Room vs. Small Room) Distortion (Clipping Types, Boost switches, etc.) Any other setting with their exact values If you agree, feel free to use the official request form here.

I do love the update process. Super nice that I don't have to be attached to a computer to do it any more!

Looking for anyone else to confirm what I think is a new bug... I have Mode 1 set up as Combo with Snapshot 1-4 on the top row and Stomp A2-5 on the bottom row. It looks like the Footswitches are correct, but Stomp A8-11's Scribble strips and LED Ring colors appear instead of Stomp A2-5. Did some fiddling, and it's repeatable. When in combo mode, the footswitch assignments follow the combo setting correctly, but Stomp 2-5's scribble strips and footswitch colors always appear on the top row and stomp 8-11's scribble strips and footswitch colors always appears on the bottom row. EDIT: I did open an official support ticket

Sweetwater's website now says shipping in July. Most release dates on websites should be taken with an entire shaker of salt these days (not a Line 6 exclusive issue, either...these things take time). There's going to have to be a concurrent firmware update in the Stadium so people can use them when they're released. I will definitely be one of those people...I have a JTV89 that I'm dying to use/automate with the Stadium and I have a sneaking suspicion that I'll be able to capture a DI signal without a DI box with the ADAT outputs.

Off the top of my head, I would guess that when you're adjusting the volumes, you are not pressing the knob down as you turn it. Make sure when you're setting anything you want controlled by a snapshot that you press and turn the knob instead of just turning it. When you do, the parameter you are adjusting should be surrounded by brackets [like this].