lcrump29

thanks for the info!. i just wanted to make sure before i shelled out $2000 for a mac

hey guys, im getting ready to get a new computer. Currently im leaning toward a new macbook pro. Im wondering though about the usb 3.0 jacks that it has. Will my 500x connect with no trouble or do i need an interface or just look at a diffrent computer?

hey guys, ive been using the rp1000 for years and i have gotten used to a few settings on it, but now i have a hd500x. Is there a way i can cycle the wah on my hd500x so i cycles on/off with the pedel itself, or is it only able to go on/off with the toe down? Ive tried going through the setting and have had no luck. Thanks in advance!

ill give that a try, ive thought about mixing and matching some of the cabs. im just not sure how to go about it. do i need to add an fx loop to the chain on my hd500x or just make the change to the preset on the mustang

yea i thought i was goin to pull my hair out...what i ended up doing is setting up the 00 patch on the mustang to the studio/direct and turning everything down except the volume...i left it at 10 and going in the utilities menu on the amp and changing the fx loop from normal to looper and ran the left and rightouts from the hd to the returns on the amp and it sounds pretty good ill just have to tweak my patches alittle. i was on the verge of taking it back to GC but i called fender and the guy told me to hook it that way if i wanted to use the models in the hd, so there an option if u wanna try that

ok ive tried the full 4cm and just the hd500x outs to the amps returns and the same issue is there and its on every patch...everything seems like it has alot of lows and i mean alot and ive noticedif i turn the dial on the amp to select diffrent amp presets i can hear a diffrence in my tone and its with every one of my guitars and thats with the 4cm and fx loop off or on and it does the same when running the outs strait to the fx returns...any ideas on what could be causing that....the hd settings areinput 1 guitar...input 2 variax...output combo pwr amp and 1/4 out is set to amp

i liked the 4cm with the replitone cause it had a few settings that i still liked using so i had it in the effects loop....if i figure the mustang doesnt have anyghing i think ill use ill just go into the fx return and be done with it...and thanks for the help radatats!!

lol...sorry my question was clearer...im not usingbthe replitone anymore im wanting to run my hd500x to my new mustang but im guessing ill be needing 5 or 6 cables instead of 4 because of the seperated fx jacks(left and right for each send and return)....i had a trs cable when i was using the hd thru the replitone

hey guys i just got a fender mustang IV v2 150w 2x12 as an early fathers day gift so i can complain alot ...but i was running the 4cm with my old amp(rocktron replitone 212) but i really cant figure this one out to get it hooked up since the amp has 2send and 2return and the rocktron only had 1 send and return so would that make this a 6cm?? should i use both sends and returns or just one of each??? any help or ideas would be great

thanks guys i was kinda leaning toward the marshall but since getting the hd500x which is my first line 6 product and im blown away by it i was gonna give their amps a look but it seems the marshall may be better suited for what i want it to do

hey guys, imin the market for a new amp and ive been looking at the spiderIV 150 2x12 and the marshall mg102cfx. i currently have an HD500x and a rocktron replitone 212 and im running the 4cm now, but i see theres no fx loop on the spider is there a way to still use just the power section of the spider like i can with my rocktron or will i have to plug strait to the front....i know the marshall has the external fx loop jacks but everything ive read the spider doesnt...im wanting to keep the tone im getting from the HD500x....any opinions would be great

basically yes and no i guess, but i have it on a clean channel with no dist. at all and i believe my od gain is about half way...i use the od as my distortion pedal not really as a boost...the over all sound i was going for wasnt clean but wasnt very dirty just enough to tell the diffrence and give my country solos more bite...if i was home i could give u better input on wat my settings are...and as for using the exp. pedal for gain i guess that depends on the user but i really couldnt get it to work for me

for a low driving crunch sometimes i back the gain down...lol...j/k bro!!!!....seriously though..i do like to try some of the diffrent overdrives with just a clean, i mainly do that to get alittle more of a country type overdrive

i ru my hd500x in the effects loop on my rocktronreplitone 212...i bought the ampfor pretty cheap as it didnt really have the tone i was looking for but just using the pwer amp section and the hd as the preamp u can get just about anything u want out of it

that did it man it was aloy easier in edit then it was strait on the unit itself....thanks for the help

hey guy im just wondering if there a way to get 2 amps in the signal chain...i know i can put 2 in there but my question can i have one with a clean tone and one with distortion and hear both coming through my amp?

thanks for the great video peter as a new hd500x user your patches are helping me out alot...as i like more of a strait forward sound vs one with too many effects and i cant wait for the next video

ok i got ya now...so i can leave the setup i have now which is the 4cm and it will still bypass the pre amp unless i add it to the chain when creating a new patch...thanks for all the help guys...seems like there alot more help here then there was on the digitech site the 500x is a beast compared to the rp1000

i wanna set it up similiar to my rp so it cuts down on my learning curve so im guessing ill have to go the outputs to the amp fx return...or my rp the 4cm did bypass the preamp unless i hit the fx loop button to add my amp to the mix....thats what i was tryin to figure out is how to route the hd500x to act sorta like that..so if i run the hd500 outs to the fx returns then just plug the guitar in without any other cables

i was just checking cause ive saw where some people add their amp in the fx loop but i didnt wanna do that

hey guys im a noob to the line 6 world although i had a digitect rp1000 for a few years im not that new to amp modelers..but by far the hd500x blows away anything ive ever played through. my question is when im using the 4cm does this bypass the preamp on my amp which is a rocktron replitone 212. all i want to use is the power amp in my combo and get all the tone from the hd500x so is there any settings i need to change in order to do this or just use the fx send and return on my amp and thats it...thats the way is was withe the rp1000 and i just wanna make sure before i do it that way

wow that sounds just like what ive been doing for the last 3 or 4 years and damn has it got old...lol

from what ive read the pod pro tops out at v1.3 which is what mine says when i hold the manual button when i hit the power...and dont get me wrong i love alot of the things i can do with the rp its just that delay in switching presets that has drove me crazy since i started using it live. i got the pod pro to kinda get used to the line 6 stuff cause i didnt wanna jump all the way in and dump the cash on a pod hd pro or a hd500x but so far from what ive saw and heard from the pod im impressed and i checked out some of the other products they have and it seems they keep most all of their stuff up to date

will the line6 edit change the patches over from pod 2.0 to pod pro when i drag them over or is there something else that i need to do...sry for all the noob questions but im new to line 6 stuff... i was a stomp box guy till the digitech rp1000 came out but i decided to swap over to line 6 because when i change patches on the rp1000 there was too much of a gap in between one patch to another so i decided to give something else a try

i mean i know alot less then you on this as i am new to line 6. i got a good deal on the pod pro rack unit and the floorboard for $100 both still have the little plastic covers protecting the screens...but ill go ahead and give it a shot at adding them or maybe ill drop line6 support an email