the29band

Just acquired a JTV-59. Strings are 10-46, however, the low E sounds very bassy on all models. Almost as thick as a bass guitar. Is there any adjustment I can make with piezos on that string to mitigate this/ Thanks.

No, I did not. I don't see that as a step as part of this: http://line6.com/support/topic/18284-latest-helix-firmware-230%E2%80%94nov-21-2017/ Also, I tried both windows and mac and same result

Downloaded and installed the HX Edit. Now everytime I try to Create Backup, it goes through fine with Global Settings and IRs but at 35% on Presets, it always gives me the same error "Errors occured during backup (code -0806)". I have tried several times, tried re-starting Helix and the software but same issues at the same exact point. Anyone experienced any such issues?

I cannot get my Helix Editor to work on Windows. Everytime I turn on the Helix and load the Editor, I get the "Helix Not Connected" error. Takes about 3-4 unplug/re-plug of the USB cable. I have tried with different USB cables and different USB ports on my PC. Having said that, I have no issues with the Editor on my Macbook. The challenge is that my PC desktop is my dedicated computer for music and while I can use the macbook if absolutely needed, I prefer to use the desktop for this purpose (also because it's connected to the big screen monitor, USB interface etc). Anyone know what might be causing this issue? Is there a Windows driver issue? I have the latest firmware and editor version installed.

I got my DT25 tubes replaced (both preamp and power) with the following tubes below, earlier this week. I confirmed that Line 6 recommends these tubes. The tech had also biased the amp post replacement. http://www.musiciansfriend.com/accessories/electro-harmonix-el84-matched-power-tubes/210092000118185?source=3TEM5KTBK http://www.musiciansfriend.com/accessories/electro-harmonix-12ax7eh-preamp-tube?source=3TEM5KTBK However, the amp is making crackling noises in Class A/B mode but NOT in Class A. Thoughts?

Hi, Can anyone share the Helix Edit Template for MIDI integration with DT25? Thanks!

So recently, my HD500 power cable into the socket on the back of the HD500 requires some wiggle to get it to turn on. Once it turn on, it hasn't turned off. I have an extra HD power cable and the issue is the same with both the cables so it seems like the issue is with the power socket on the back of the HD500. Any ideas on what I can do to fix this?

I have a Fender Mustang III (V1) that I'd like to use with the recently acquired Helix. So far I've been listening through headphones. Any recommendations on how to set it up? Do I just send the 1/4" Out from Helix to Mustang Effects Return?

Is it possible to update the JTV firmware without the interface i.e. using HD500 or do I need the interface?

These good? http://www.musiciansfriend.com/accessories/electro-harmonix-el84-matched-power-tubes/210092000118185 http://www.musiciansfriend.com/accessories/electro-harmonix-12ax7eh-preamp-tube Thanks!

I hear this in Class A as well

I have not changed the tubes on it since I got it about 1.5 years ago but I have also rarely used the amp during this time. I will go ahead an get the tubes changed. Thanks.

I get this hum and crackle noise in my DT25 head/cab amp. The noise starts a few minutes after the amp has been turned on and even when the amp's volume is all the way down. The noise is there with or without a guitar plugged in. Anyone know what might be causing this? Attached is a sample I recorded. DT25.mp3

Thanks!

I am trying to use HD500 as an audio interface. With my guitar and headphones plugged directly into HD500 and HD500 connected to macbook via USB, I am trying to play guitar and monitor the S-Gear as I play. I selected a dry patch in HD500 but am I hearing both S-Gear tone and the dry HD500 tone through the headphones. Is there a way to turn off HD500 dry sound through the headphones? I am using Reaper on a macbook for this.

Anyone?

How would you compare the JTV 69S magnetic pickups/tone to a Strat? Is it comparable to a Mexican or American Strat?

I experience the same on my JTV with modeling on. I don't experience the same on magnetic pickups. I don't have any fret buzz or nut rattles.

How come there aren't many reviews on the Variax Standard? Are these not popular at all? It's easy to find a review on JTV and while I understand the Standard is a relatively new model, there are only a couple of reviews out there. I usually look for "non-pro" video reviews (i.e. not Line 6, Sweetwater etc.) because the commercial reviews always sound good, no matter what the gear is. I might be returning a JTV that I recently purchased and am thinking if I should get the Standard. I am aware of the feature differences. What I am looking for is if JTV worth the extra cost if I am good with the HD firmware. If the models sound exactly the same, what value is JTV providing that the Standard does not?

I think I hear some of it in magnetic pickups as well. I am thinking I should get the action adjusted to remove buzzing and then test it out. Thinking it might be the buzz causing it.

I got my new JTV69S yesterday. Not sure if this is a technical issue with the guitar but the low E string has a weird boomy sound to it. It lacks sustain, is louder than the rest of the strings and sounds out of tune (even when tuned properly). This is even more noticeable when playing with distortion. Now, there is a some buzz with that string so I am not sure if that's what's causing it. I am wondering if there are any issues with that piezo. I can try to post some samples tomorrow. I have owned a JTV before and never noticed this prior. Also, I have reflashed the firmware. I am running 1.90 on it. Any thoughts?

I received a new JTV69S last night. The guitar was flashed to 2.21 and I immediately rolled it back to 1.9 without even playing the guitar because that's the only firmware I like. I plugged it in, works fine without the modeling but with the modeling on the A string has no sound. I am assuming the piezo pickup is dead for that string? Should I try re-flashing the guitar? If it indeed is a bad piezo, can I go to a line 6 local service center and get it replaced there or do I have to send in the guitar? If I have to send it in I'd rather not keep it but if it's something that can be fixed locally, I can keep the guitar and get it fixed. Thoughts?

I recently purchased a 69 but had to send it back due to issues with the guitar. I am thinking of getting a 59 as a replacement. Early last year, I got a chance to play both 69 and 59 for a very short period of time and the modelings sounded different to me. The 69 sounded better. Don't know if there was an issue with the 59 but they were both on the same firmware. Can someone, who owns both 69 and 59, tell me if this is true at all? If you can share sample recordings, that would be great. Appreciate the help!

Does anyone know if any of the 59 also had the high E slipping issue? I am thinking of exchanging the 69 for the 59...

I received a new JTV 69 2 days ago. I can barely play the high E string without it slipping off the fretboard. I read on the forums about this issue on the early models but didn't know they still existed. The one I got is a 2013 model (unless that's considered early as well). It happens every time I play open D, G type chords chords or any hammer on/pull offs on that string. Do I send the guitar back? I don't want to change the neck and void the warranty. Thanks!