jw1232

Vintage Collection: No complaints at all. Very usable. Thanks 3 Sigma Audio for the tip to adjust brightness at Amp and/or Impulse. I do have to say, people who are complaining about getting 20 usable presets, 20 IR's to put in there 1600.00 Dollar Helix for 15 bucks are insane. 3 Sigma just saved me hours upon hours of tweaking when I should be playing.

I've used this option, recording individual instruments to separate wave files stored in the same place as the recorded wave file as if you were going to playback a live recording. this enables you to mute instruments live and just playback the unmated instruments for your performance. here is the rub, the wave files take up a channel therefore you can not plug into that channel with a live instrument. your placement of the wave file needs to mirror the scene setting the same as a live recording playback. The last is it is extremely time consuming and does not give you a lot of realtime control and a very good heads up display of what song your pulling up etc. if you have to adjust mixer you have to get out of the record/ playback screen adjust and get back to playback to start and stop. I've have great success with Airport and a iPad using Track Program through air or1/8 input. trust me when I say the time you spend at home tweaking the tracks with the proper instrumentation and levels is nothing compared to the work to set up a multitrack player. Good Luck.

Thank you Dboomer, I was directed to ship the unit back to Line 6 so they could examine the problem. Did not seem to matter what setup was loaded I still had no XLR input even after Factory Default. We will see!

Honestly I did not attempt to plug a ine into the 1-12 inputs. I was referring to the 13,14,15,16 inputs. Thanks for answering the previous question about the buttons. I always wondered about that as it seems antiquated compared to the rest of the board. Trying to resolve the problem with customer support. Thanks

I will. Thank you. Any ides what it could be though. I just went through everything and it acts just like I have the mic mute engaged but its not. I even tried to press it several times to see if its is stuck. Noticed when I first got the mixer that those buttons look great when not lit but when lit do not seem right with light showing from sides. (Mic Mute and All Mute) Is this normal.

Had a catastrophe at live gig this afternoon. I have had Line 6 M20D for less that three months and have really enjoyed it's overall performance and abilities. I can't say enough about the sound quality how it has enhanced the bands I performed in and mix. Today I setup the stage as usual and when I followed boot up procedure and attempted to check sound I realized that none of the mics (XLR) inputs were working. First thing I did was check the mic mute and then overall mute. I checked the solo and tried to set auto trim with no signal. This set up was a setup I have used and saved. I tried to load up a blank setup to troubleshoot and still got no signal in XLR however line signals worked fine. After about an hour of scratching my head and trying different things I restored to factory settings and tried a blank setup having the same results. I did notice that when turned up a lot I can get something to register but it is not enough to recognize as a signal. Everything else seem to work fine but no XLR inputs. I had to drive to the music store and buy a new 20 channel board to get through the gig. Couple of things to note: 1. Mixer recognized inputs 2. Had output only when line level was hooked up 13-14-15-16 3. Mic mute was not activated 4. All Mute was not activated 5. Mixer was reset to factory settings and problem persisted 6. The environment was air conditioned and out of any type of heat or sunlight 7. No XLR input work still I don't know if this is a board I can rely on for my band and or business. Today's gig was ruined because of this mixer. Anyone who has experienced this please respond ASAP Jwright1232@yahoo.com BTW the closest music store to me did not carry this product to even swap it out. Guitar Center Very frustrated for a 2100 mixer bought brand new.