brenhaze

My support ticket concluded faulty, it's been collected today for a refund. I will stick with my G70 and multiple Transmitters instead.

I received my G10 today and it's been charging now for over 8 hours, and no charge held whatsoever. Just flashing Red and the charging base pulsing Red. When removed from the base its flashes red, It won't work at all or hold any charge at all :/ Very disappointing as looking at the FAQ I would of thought after 6 hours of charging I could at least test it a little but nothing. As the FAQ advised of a small charge after just 2 hours. I've seen a few others with the same problem and units were faulty. I will return it and stick to my G70 and multiple transmitters as I've now seen more people with the same problem :/

I received my G10 today and the same problem, it's been charging for many hours and still flashing Red. Still not working, Still won't work or hold any charge :/ Very disappointing. I guess I will return and stick to my G70 and multiple transmitters :/ I read above one guy is still waiting after 36 hours of charging and no luck.... Anyone had this problem? was it replaced/faulty etc? Update: Still not working, I've just seen a few others with the same problem and units were faulty. I will return it and stick to my G70 and multiple transmitters as I've now seen more people with the same problem :/

That's odd as mine arrived today, it's been charging for 4+ hours and still flashing red? any ideas?

What PSU did you guys buy? I saw the DC1-G but it shows it only outputs 200mA

I have the same problem but when I looked at the DC1-G it shows it only outputs 200mA Example: http://www.richtonemusic.co.uk/products/line_6_dc-1g.asp Can anybody advise if they have tried and that it works ok?? Thanks

I know in the manual it says "step on foot switch D and the JM4 enters Alternate Footswitch Mode. Hit it again within 1.5 seconds and you’ll toggle thru the 4 alternate modes." I'd like to know specifically in "Record Select Mode" As I dont want C as "Input Select" I'd like to change Pedal 3 to "play/stop" The reason is I want to scroll through easily recorded wavs etc using A / B up/down and then simply play/stop with the 3rd pedal. Do you know if it is possible?