weitzhandler
-
Posts
53 -
Joined
-
Last visited
Everything posted by weitzhandler
-
I opened this idea, please vote!
-
The lack of this feature is a great bummer to me! The CustomTone didn't work for me at all.
-
Line 6 POD Go not recognized as audio device by Windows
weitzhandler replied to weitzhandler's topic in POD Go
You probably mean this one. Thought it was worth dedicating a new thread to this issue. -
I opened a new issue.
-
You're right, but I was hoping since you guys have experimented with the EP Booster and know what to expect, there might be something similar in the POD Go too, was just trying my luck. I'm sure the POD Go and the HD have a lot in common, no?
-
Hey guys, I wonder if there is anything close to the EP Booster in the POD go, can you think of something off your heads? Thanks!
-
Hi, The POD Go came with the power supply in this picture: The back side has an extensible slot where you can attach blade adapters to match different countries: I travel a lot and I need such blades for EU and the UK. After some fairshare amount of research, I've bought the CUI SMI-EU-2 and SMI-UK-2 blades for about $20, waited over a month for the shipping, then it did not fit on the power supply at all. In the picture below are the UK adapter blade (~6mm in height) compared to the original US one (~12mm). Where can I find blades for the PS that cam with the POD Go? Please advise Best regards
-
Hi, I've installed the "Line 6 Driver2 PodGo v1.95 Installer" driver, following the instructions (device disconnected at installation). When I connect my device, I can see "Line 6 POD Go" in Device Manager (under Sound, video and game controllers), with an exclamation mark on top of it. When I open the device Properties, the Device Status reports the following: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) {Bad Image} %hs is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0x The device does not appear in either the playback nor recording devices in the sound mixer. Note: The device does play well with POD Go Edit. Please advise. Best regards, Shimmy
-
@silverhead, thanks for your answer, no it wasn't connected at installation.
-
Hey guys. I've installed the "Line6Driver2PodGov1.95Installer.exe" file from the download page, but in device manager I see this: In addition, the device doesn't show up in the Windows audio control: In the list above, Realtek is the built-in motherboard sound card and Dell is the monitor audio - Line 6 isn't there. Here's device properties: Please advise. Best regards, Shimmy
-
I'd still want the looper externally having it engaged only when actually looping, and for that edge case that while looper is active I'm trying to switch to a preset that is overloaded with DSP usage it should then show an error and abort switching to that preset. But anyway, having the looper as a block is super counterproductive and misdesigned. I see it as barely useful as it is if you can't switch presets. Adding looper as a block to all those presets is silly to me. Of course not. I'd like to see it improved tho. Hence my feature suggestion.
-
Guys I opened a feature request, even you use a looper for practicing (which isn't enough, I would expect the looper for accomodate for live performance too, at least basic scenarios), switching FX in between is an elementary requirement and the looper shouldn't suck up an FX block anyways. Please vote and comment in here. I hope the staff at Line 6 read those requests. Thanks
-
Thanks. Posted here.
- 23 replies
-
- 1
-
-
- looper
- looper mode
- (and 2 more)
-
Fairly unproductive if you ask me. Sounds like a good candidate for a feature suggestion, no? Is there a dedicated forum for that in here?
-
Thanks for your reply. Based on what I gathered, the Looper is considered as a block in the preset. So do you have to have to have this block in all presets you would like to use while looping? Unless I misunderstand something.
-
Hi folks, Is there an outer looping mode or another way to switch around presets while looping/overdubbing? Thanks!
-
Hi, I use several instruments on stage or studio, and would like to easily switch between them. I was wondering if there is a way to save several modes of the Global EQ and store them by instrument name. Same with input gain volume / pad. Will this feature be implemented ever?
-
WOW that's neat! I will need an ⅛" to ¼" converter, but that's definitely not of any issue. I'm impressed the POD Go got us covered again!
-
Hi, I play the violin and sometimes I'd want to walk around the venue and play the violin. I used the Sennheiser ew172 for a decade with good results, but it was stolen recently, and I'm looking for alternatives. The aspects that are important to me: Wide coverage - at least cover a fairly large wedding hall Size and weight matter - I don't like schlepping! The smaller the transmitter and receivers are the better 9VDC regular stompbox power input - I hate carrying and maintaining a bunch of power supplies I've been looking the G10, I do love the idea of a pluggable minimal dongle that charges from its jack, but I read it only covers 50 feet, which isn't enough. My question is, can the G10 transmitter work with the G50 and plug into it for charging? If so, I'll buy the G50 package and use it in big halls, otherwise I'll use the small transmitter instead. Are there any planned wireless products for the future to keep in mind?