amasteve

Big thanks for doing this, hopefully L6 will compensate you for doing what they should have done. Sure they will. :-)

Thanks, was easy to import new F1/2 set lists you provided, updating to new HXEdit & firmware was easy, although the new F1/2 presets were missing. Thanks for making those files available.

That did it. I think this was a "duh" on my part. Again, thanks!

Thanks, I tried downloading it from the L6 site and it says "At this time, there is no software available that matches your selection"...I tried it with both Pod Go/License Manager/OSX and ComputerLicense Manager/OSX on the download page. No Joy.

Hi, I bought a new mac, ghosted the old onto the new and now when I try to backup from Edit, I get the error "Failed to open license. (code -1130)." Any Ideas? Was thinking I need to uninstall and reinstall edit, but thought I would ask around first so not to make matters worse. Thanks!

Great tip, sorry for the late reply, been out of town. Thanks!!

That's the ticket, I will take another shot at it. Thanks!

I bought my first PGo in September, discovered the issues (via forums, but did test it myself) as I was switching back and forth between a wireless device and a guitar cable (my PGo is NOT the wireless model) the HF rolloff was noticeable. I notified L6 in late December, they issued a ticket, sent it in (they paid for it), they returned it in about 2 weeks or so with the issue corrected. I bought a second one on sale in December and am about to send it back to get fixed. A little bit of a pain, but definately worth the effort.

What would be cool is to assign a footswitch to the Output Main Out, ie, if you have it set to say +5 db, hit the footswitch to change setting, ie, 10 db. This would be the perfect clean boost. Is it possible or even as a snapshot? I have tried it and it doubles the output level, ie if set to 0, next setting 10, it changes to 20 when activating the footswitch. I am obviously doing something wrong. Thanks!

Got it, big thanks!

I just purchased a PC112+, the manual says you can switch between mic or line level out on the xlr outs. I am sending the signal to a mixer. The regular PC112 (NOT plus) is mic level out only. So, for the PC+, Which is better, mic level or line level out to the mixer or does it matter? Thanks!

OK, this took me by surprise. I am currently going into a Powercab 112 and adjusted the PC112 input according to the manual...BUT, I have my PG main volume set to about 2 o'clock and used generally the preset volumes from the Factory and downloaded presets with some minor output volume adjustments. If I heard you right, I need to take the PGo volume up to about max, re EQ and adjust my preset output volumes and re dial back into the Power Cab to get optimum S/N ratio? Thanks, I think :-) I use the output on the PC112 into my mixer.

OK, I have a dumb question here: I have an ISpot CS 12 that I am not using, if I am not using any of the other power outputs, do I just plug into 1 of them to get the total amperage for the PGo or use some sort of daisy chain?

If you use the Main Out output, you can go to Output Main Out (last block in signal chain) and increase the output level.

OK, thank you!

Hi, this is probably a dumb question, but I noticed that it is common on some presets (free or purchased) to raise the output level on the Output-Main Out block (last in the signal chain), particularly in Brit amp/cab presets it seems. Why would you raise it here and not post Amp/Cab in an FX block like an equalizer block or other gain producing FX block? Thanks,