stefoy

Gk001's suggestion of disabling verifier seems to be working for me so far. Not sure how risky it is! Usually the thing that seems to be most reliable is to make sure your sample rate for your pod matches that what you're using in your project. 44,000hz at 24bit seems to work for me

Yep. I now just use the POD for guitar modelling, I'm using a Focusrite as my audio interface and the bsod have stopped so its definitely the Line 6. Very disappointing, wont be buying Line 6 again if they sell these faulty products, its as though they're not aware of the problem even though its a very common one.

I am getting constant crashes when running Cubase 9 on a brand new Windows 10 HP Pavillion laptop (Intel i7, 8GB RAM) The Line 6 is the default audio driver, I've disabled the webcam, other sound cards, tried removing anti virus software and manually gone through and updated all my drivers. The fault is mostly BAD POOL HEADER and the crash log is saying the the LINE6PODHDPROSE.sys driver is to blame. Running Cubase with the standard audio drivers is fine, running any program other than Cubase is fine. I'm not the most computer literate guy in the world, but I've searched Google and countless forums and followed all their advice and the problem is still occuring. Do Line 6 need to add an update for these drivers to stop this happening? Couple of logs for your perusal: On Fri 13/01/2017 00:25:52 your computer crashed crash dump file: C:\WINDOWS\memory.dmp This was probably caused by the following module: l6podhdprose64.sys (L6PODHDPROSE64+0x6FBC7) Bugcheck code: 0xD1 (0xFFFF860F3A663000, 0x2, 0x1, 0xFFFFF803FF46FBC7) Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL file path: C:\WINDOWS\system32\drivers\l6podhdprose64.sys product: GuitarPort company: Line 6 description: GuitarPort WDM Audio Device Driver Bug check description: This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high. This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: l6podhdprose64.sys (GuitarPort WDM Audio Device Driver, Line 6). Google query: Line 6 DRIVER_IRQL_NOT_LESS_OR_EQUAL (this was the first DRIVER IRQL NOT LESS OR EQUAL error, the rest have been bad pool headers) On Thu 12/01/2017 20:35:15 your computer crashed crash dump file: C:\WINDOWS\Minidump\011217-25937-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x14A6F0) Bugcheck code: 0x19 (0x21, 0xFFFFCB0B54460000, 0x1800, 0x27101D8527101D83) Error: BAD_POOL_HEADER file path: C:\WINDOWS\system32\ntoskrnl.exe product: Microsoft® Windows® Operating System company: Microsoft Corporation description: NT Kernel & System Bug check description: This indicates that a pool header is corrupt. This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules. This problem might also be caused because of overheating (thermal issue). The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

I did mean that, not sure what I was thinking of! Thanks anyway.

Been searching for this but surprisingly not found anything answering my question. I'm using a hd pro x and hoping to record a dry signal into my DAW but use the workbench interface as a channel insert to add distortion and fx post recording in the same vein as you can do with Pod Farm. Doesn't appear to be possible? Thanks in advance