alexdreamworld

I retested and I normally find out from where the problem is so it is a bundle problem of the old version of the firmware 2.10 backup. If I install it this can cause this problem so erase on the display the tap / tuner function. It's pretty weird but since I've updated the version 1.12 to 2.11. Apparently I no longer have this problem of display by completely redesigning my presets on 2.11. I think the problem is present when the IRs of the sites are reinitialized. Because if presets are with IR backup from the previous version of the firmware too. This must cause this glitch / bug on the TAP function to display. In edit mode I had a new display glitch on the tap function with the white screen a bit and the word Tap writes further down.I have updated 2.11 offline on line 6 Updater. To consider that it is necessary to remake all these presets from the 2.11 otherwise you risk having odd problems this producing.After that I do not think it becomes harware but rather software.Because a hardware problem is either it works or not and not it comes back to life on its own ... :blink: :huh: In edit mode I had a new display glitch on the tap function with the white screen a bit and the word Tap writes further down. I have updated 2.11 offline on line 6 Updater. For now it remains stable. To consider that it is necessary to remake all these presets from the 2.11 otherwise you risk having odd problems this producing. After that I do not think it becomes hardware but rather software. Because a hardware problem is either it works or not and not it comes back to life on its own ... B) The personal IR and the patches below the 2.11 in any case partially cause this problem my unit seems stable for the " But I still test. In any case for now I do not need to return my unit to my dealer.

I have open a ticket but i am amazed that no one is the same problem as me. My helix is one of the first units released in September 2015.

The display works but for example for the 2.10 I was forced to put I do not know how many times for Tap to reappear. I have this problem since the 2.00 update and each subsequent update. I noticed that the PC editor could even cause this problem by testing.

Since several updates I have this problem on the tap on the screen no longer appears it's random.(Since version 2.00 and higher 2.11) I have done several times the resets and maj and this may appear as disappearing at the start. Thank you for helping me. See below:

Following the new update 2.00 so you no longer need to manually reverse the polarity for Roland EV5 type. Finally Line 6 took into account user demand and thus for example the external expression pedals (EXP2, EXP3). Just reverse the polarity directly in the "Global Settings" then take "Exp Pedals" like this by changing from "normal" to "inverted":

I found the solution to my problem on Windows 10 is the fact not to run in administrator who pose the problem and not the antivirus internet security kaspersy.

Update Problem 2.01 On my Windows 10, I have had trouble installing the update .... after several times by uninstalling the Line 6 1.09 updater and reinstalling !!! For my Helix since 2.01 is hardly recognized. In the editor 2.01, it is marked offline and impossible to recognize it in the editor even though I managed to put the firmware 2.01 on Helix. I uninstall and reinstall several times but not always disconnected in the editor. Do you have a solution ? Thank you.

I created a forum for Helix all nations are welcome: http://line6helix.forumactif.org/ Thanks.

Vote here: http://line6.ideascale.com/a/dtd/Firehawk-FX-Correction-latence-change-preset/726710-23508

I use android 4.4.2 on my part and I have the latency problem and not from Apple ios So I have a mobile phone Galaxy Note 3 and Galaxy Note tablet is no old equipment.

Reminder I ask a question and not an attack since I have the pod hd pro x and the Firehawk. So I inevitably ask myself.

Yes men thanks B)

It's still great that you're telling me this means that the Dsp has a limit. I had the axe FX II awhile for a year if no limit creativity. Apparently the architecture of the helix or at least 2 processors that uses the Fractal Audio axe FX II. So certainly if architecture is not the same that means that there li possibilities Access has a limit on the Line 6 Helix from what you tell me.

I open the question that kills the helix has a limitation in terms of effects, because users no longer want I personally think no one wants the famous DSP LIMIT OVER !!! who had the pod or Hd HD version X. Especially when buying a device that is intended to boosted creativity.

I just created an idea see link: http://line6.ideascale.com/a/dtd/Firehawk-FX-Correction-latence-change-preset/726710-23508 ;)