szczepoxx

Translating presets from Helix down to POD Go is a massive technical headache due to the POD Go's rigid block architecture and single DSP limits — you almost always have to sacrifice blocks or routing to make anything fit. However, if anyone stumbled upon this thread looking to go the other way around (POD Go --> Helix), that direction is fully solved. Since Helix has plenty of DSP and open routing, transferring POD Go patches translates cleanly. I developed a web tool called HelixTools specifically for this: • Converts .pgp files straight into .hlx • Preserves blocks, parameters, bypass states, and snapshots • Supports jailbreak / free-block POD Go presets • Runs locally in your browser Thread with video demo and details here: https://line6.com/support/topic/72389-tool-helixtools-convert-pod-go-presets-pgp-to-helix-hlx/ Hope it helps anyone upgrading their rig from the POD Go!

Reviving this thread because it’s still one of the top results when searching for a solution to this. Since Line 6 never released an official converter, I ended up building a browser-based utility called HelixTools to bridge the gap between POD Go (.pgp) and Helix (.hlx). It automates the process and carries over: • Compatible amp/cab and effects blocks with dialed-in settings • Bypass states and expression pedal assignments • Up to 4 snapshots with custom names • Jailbroken / free-block presets from POD Go Everything processes locally in your browser (no preset files uploaded to any servers). I created a full walkthrough thread with a video demo over in the Helix section: https://line6.com/support/topic/72389-tool-helixtools-convert-pod-go-presets-pgp-to-helix-hlx/ Or you can check the demo directly here: https://youtu.be/de98VdBfWps Hope this saves some time for anyone upgrading their rig and looking to salvage their tone library!

Hi all, Helix LT and Floor prices are dropping hard on the used market right now, making the upgrade from POD Go super tempting. I recently upgraded from a POD Go to a Helix LT. While exploring HX Edit, I realized there is no direct way to transfer my existing POD Go patches without manually dialing in all the blocks and values one by one. To save time, I developed a small standalone tool called **HelixTools** to convert .pgp files into Helix-ready .hlx patches. Here is a short real-time demo showing the conversion and HX Edit import: https://youtu.be/de98VdBfWps Key features: - Runs locally in the web browser (no upload required). - Converts .pgp patches to .hlx for Helix Floor and Helix LT. - Transfers supported blocks, bypass states, snapshots (up to 4) with names, and expression pedal assignments. - Flags IR reminders or complex jailbreak blocks so you know what to check after importing. For anyone who upgraded recently and wants to save hours of manual recreation, the tool is available here: https://helixtools.gumroad.com/l/helixtools Any questions or edge-case preset tests, feel free to ask!

Hi all, Recently upgraded from a POD Go to a Helix LT. While exploring HX Edit, I realized there is no direct way to transfer my existing POD Go patches without manually dialing in all the blocks and values one by one. To save time, I developed a small standalone tool called **HelixTools** to convert .pgp files into Helix-ready .hlx patches. Here is a short real-time demo showing the conversion and HX Edit import: https://youtu.be/de98VdBfWps Key features: - Runs locally in the web browser (no upload required). - Converts .pgp patches to .hlx for Helix Floor and Helix LT. - Transfers supported blocks, bypass states, snapshots (up to 4) with names, and expression pedal assignments. - Flags IR reminders or complex jailbreak blocks so you know what to check after importing. For anyone who upgraded recently and wants to save hours of manual recreation, the tool is available here: https://helixtools.gumroad.com/l/helixtools Any questions or edge-case preset tests, feel free to ask!