Search the Community

Hi together, I wonder how to maintain expression pedal state Exp1/Exp2 and FS5 state of SP1-L6H between Presets. I set in Globals / Footswtiches ToggleExp to FS5 Therefore when Exp1 is active and I press toe Exp2 will be adressed back and forth. Each time I press toe a FS5 will also be sent. I use it with the HxStomp to use the toe to switch adevice on and the other off together at the same time with the neat functionality that the pedal changes EXP1->EXP2 I can control 2 continous parameters together nicely .... until I switch presets then my problem starts! let me explain! For instance: Preset A: Volume Positon mapped to Exp1 Wah Positon mapped to Exp2 Bypass Assign both FS 5 Initially Wah is bypassed Preset B (Same as A): Volume Positon mapped to Exp1 Wah Positon mapped to Exp2 Bypass Assign both FS 5 Bypass Assign FS 5 Initially Wah is bypassed 1) On Preset A I press Toe and Volume is bypassed, wah goes on - Wah position is controlled by Exp2 2) I change preset to B 3) PROBLEM: The system recalls that Exp2 is active but on Preset B is Wah Bypassed and the Volume Pedal is Waiting for Exp1 4) If I press Toe I turn off Volume in Favor of WahWah but I also switch from Exp 2 back to Exp 1.. deadlock!! Now I have to manually turn off the Wah and turn on the Volumen Pedel and than I can use the smart switching between Exp1 and Exp 2 again but only as long as I stay in the preset. If I got to next preset the described problem persist. I can not imagine that this is expected behavior. I need something like a reset of the Exp1/Exp2 switch state If I enter a preset or maybe you have an Idea how to do ? Help much appreciated!

I started this post as a request for help troubleshooting an issue with my new Mission SP1-L6H not switching between EXP1 and EXP2 on my HX Stomp. I had factory reset everything and followed the L6 manual and Mission's instructions exactly, and was convinced that something was broken. But about halfway through writing this post I stood up and pressed hard on the Mission pedal footswitch, and it switched from EXP 1 to EXP 2 just like in the videos. I think the issue is that the toe switch makes a nice clicky sound when you press it lightly, so I thought I was activating it. Turns out you have to really put some weight on it to activate it (which makes sense since you wouldn't want to accidentally trigger). Anyway, I didn't come across this tip in my searching so I thought I'd go ahead and leave this here for future generations. TLDR: don't skip leg day.