andre_lay Posted November 17, 2014 Share Posted November 17, 2014 Hello guys, I new using my POD HD 500. Bu somenthing strange is going on. When i select any AC30 amp my volume became drastic low, even using the volume and drive all the way up. I have always to compensate with mixer volume, but compare with other amps the volume is too low. I dont have any controller atached to the AMP (EXP?) OR FS? Does anyone now why this is happening? Quote Link to comment Share on other sites More sharing options...
phil_m Posted November 17, 2014 Share Posted November 17, 2014 The AC30 is one of the quieter, if not quietest, models in the HD series. Using the mixer to even things out is probably the best way to go about it. Also, are you sure you're using the full amp model, and not the Pre version? I believe the Pre version of the AC30 is really quiet, too. Even more so than the full model. Quote Link to comment Share on other sites More sharing options...
moogary Posted November 17, 2014 Share Posted November 17, 2014 I had the same problem and noticed that when I copied an AC30 patch, in Line6 Edit that the amp was turned off. When I clicked the radio button on, it came up to the level of the Twin Reverb (slight boost in the mixer volume) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.