moogary
-
Posts
68 -
Joined
-
Last visited
moogary's Achievements
-
HD500X & POD HD PRO X are the same guts, yes? Can I transfer patches?
moogary replied to NoCoolUserName's topic in POD HD
Yes. You only have to watch the DSP loading for some effects -
You may have to calibrate the Pedal
-
Also, with DT Edit, you can load the A/B channels using the midi connected to your computer. Once disconnected or DT power off, it retains the settings until you change them (no need for Midi).
-
Après avoir enregistré votre équipement (POD), utilisez Line 6 Monkey pour télécharger les drivers afin que votre POD soit reconnu par votre ordinateur.
-
Thanks for your response. I was hoping to avoid micing since it can be noisy in my house :(
-
I purchased IK Multimedia iRig Acoustic Stage. It sounds great through the POD with headphones. However, when I try to record it using Reaper, it sounds thin and trebley. I also tried pulgging directly into the DAW via the micro USB port on the iRig (bypassing the POD) and have similar results. Anyone have luck recording classical guitar?
-
There are 2 Long and McQuade dealers of Line 6 products in Ottawa. https://www.google.ca/search?q=long+and+mcquade+ottawa&rlz=1C1CHWA_enCA597CA598&oq=long+and+&aqs=chrome.3.0j69i57j0l4.6579j0j7&sourceid=chrome&ie=UTF-8
-
Also, I believe that the 5150 Panama amp is only in the separately purchased model pack.
-
Worn rubber all ground up ????
-
Did you perform a Global Reset before creating your patches (as well as calibration)?
-
Do you have the Line 6 Link connected?
-
I believe that the Master volume was synced in DT 2.0 of the firmware. See the latest DT Manual
-
I also believe that if you change any settings for a particular amp with MIDI (i.e., DT Edit), it will save the settings in the amp (even if you turn it off). If you load your favorite amp and settings into the A/B channels, the next time you turn on the DT, it will come up with the last settings set via MIDI.
