carminepalamara Posted January 25, 2015 Share Posted January 25, 2015 Hello I hope someone can help me because I'm beginning to feel myself a stupid :)I need to connect my electric guitar to PC as flexibly as possible. This is my "configuration"Electric Guitar - > BEHRINGER with 12AX7 preamp - > sound card line in* - > Guitar Rig 5 - > Speakers* Creative Sound Blaster X - Fi , Audio Creation Mode ( ASIO2 )I make this assumption because I would like to eliminate the preamp, too much hiss, hum and noise, and also " the Native Instruments Guitar Rig 5" software with a multieffects with presets "ready to use" as Line6 "tones from the cloud". But just one important function I need.....Currently by the software of my logitech webcam I can set "what-U-hear" as source for audio recording instead Integrated microphone and so recording video and audio simultaneously while I'm playng guitar through the Guitar Rig 5 Software. That's my greatest and only music aspiration. Just recording video and audio simultaneously.thanks for the help that you'll give to me :) Quote Link to comment Share on other sites More sharing options...
carminepalamara Posted January 30, 2015 Author Share Posted January 30, 2015 no one can help me ? Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted January 30, 2015 Share Posted January 30, 2015 For a start, you should be using an audio interface to get your guitar signal into your computer - this could be a Line 6 device like a UX2, or some other interface with instrument input. the Creative soundcard is really a gaming card, not the best device for audio AD conversion. The way most people will record audio and video at same time are two different chains - one the video recording, and two the audio recording, then combine them in video editing software. 1 Quote Link to comment Share on other sites More sharing options...
gary9605 Posted January 31, 2015 Share Posted January 31, 2015 For a start, you should be using an audio interface to get your guitar signal into your computer - this could be a Line 6 device like a USX2, or some other interface with instrument input. the Creative soundcard is really a gaming card, not the best device for audio AD conversion. The way most people will record audio and video at same time are two different chains - one the video recording, and two the audio recording, then combine them in video editing software. I use the UX2 for my audio device ( but i would expect any such device would work actaully ) + Pod Farm software + A Flipvido camera ( probably nolonger sold ) which is relativly simple to use. Next I use Adobe Premier Elements as the Video editor. Once i have the audio track then I can import it into Elements, then sync it up with the video track. [ the flipvideo unit produces audtio as well, but it can be muted or volume reduced in order to help sync the outside audio (UX2 / Pod farm) ] Elements shows a WAV while in the video track which also helps in sync of the UX2 builr track visually. On a side note, I feed the UX2\Pod Farm into Reaper ( a SAW package) and render it out for input to Elements Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.