Brynbeagle Posted February 10, 2015 Share Posted February 10, 2015 Just got the Hd500x and I was wondering if anyone has any suggestions to Velcro-ing it on a pedal board. Can I take the feet off and put the original screw back in without damaging the hd500x internally? Or can I just take the feet and screw off and have the flat surface like that? (Do the screws on the feet hold the u it together? Any suggestion would be greatly appreciated thanks. Quote Link to comment Share on other sites More sharing options...
pianoguyy Posted February 10, 2015 Share Posted February 10, 2015 I have brackets. The pod fits in between them. I don't know how often you get gear. But my stuff is pretty long term, so I don't need to worry about shuffling stuff around. 1 Quote Link to comment Share on other sites More sharing options...
ricstudioc Posted February 10, 2015 Share Posted February 10, 2015 it was noted in a post some time back - and recently confirmed by me as I changed board layouts - there are 2 raised metal ridges that run the width of the 500x. Perfect for a velcro mount without having to mess with the feet or some such. Recently I stumbled across a 3M "hard" velcro, which only has one "side", which interlocks quite securely. Reminiscent of the old ProCo pedal mounting feet of the 70's/80's. Found it at Home Depot with the other velcros. So far, so good with it - but note that I do not transport the board with the pod attached. Everything else is permanently attached, but the pod gets placed (and locked in) upon setup. 1 Quote Link to comment Share on other sites More sharing options...
stumblinman Posted February 10, 2015 Share Posted February 10, 2015 I have my 500x attached by Velcro to a Pedaltrain PT Pro and it works fine. I usually push down on the body of the Pod before I repack it to make sure it is secure. Yes, you can remove the feet with no interior issues. 1 Quote Link to comment Share on other sites More sharing options...
Brynbeagle Posted February 10, 2015 Author Share Posted February 10, 2015 After taking the feet off. Did u put the screws back in the hd500x? Quote Link to comment Share on other sites More sharing options...
stumblinman Posted February 11, 2015 Share Posted February 11, 2015 After taking the feet off. Did u put the screws back in the hd500x? Yes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.