aerosol_d7 Posted June 6, 2015 Share Posted June 6, 2015 Maybe this is already known or some posted, let me know I'm creating a patch with pod edit, pod hd500 firmware 2.62, ab'ing two patches for comparison and sometimes the sound is too different when I go back and forth between them. And the patches are sent to pod. I noticed and I disconnect the USB and reboot pod and the original sound from the patch come back again, ie, some kinda bug. maybe we should tweak from the pod directly not with pod edit, because the patches I'm on are high gain and noticeable, otherwise I won't notice it. I always use hd edit only for edition but it seems not reliable....any other user experiencing that? 1 Quote Link to comment Share on other sites More sharing options...
Brazzy Posted June 6, 2015 Share Posted June 6, 2015 Maybe this is already known or some posted, let me know I'm creating a patch with pod edit, pod hd500 firmware 2.62, ab'ing two patches for comparison and sometimes the sound is too different when I go back and forth between them. And the patches are sent to pod. I noticed and I disconnect the USB and reboot pod and the original sound from the patch come back again, ie, some kinda bug. maybe we should tweak from the pod directly not with pod edit, because the patches I'm on are high gain and noticeable, otherwise I won't notice it. I always use hd edit only for edition but it seems not reliable....any other user experiencing that? Bug or not I tweak using the pod just about all the time. I've had this issue before too. Good observation. Quote Link to comment Share on other sites More sharing options...
aerosol_d7 Posted June 6, 2015 Author Share Posted June 6, 2015 New patch, you change it, send to pod and compare with other patches, come back to the changed one it loads the unchanged. It seems the second, thirdtime you send to pod does not take effect (kinda buffer) but if u reboot the unit it loads the saved one. 1 Quote Link to comment Share on other sites More sharing options...
duncann Posted August 20, 2015 Share Posted August 20, 2015 I've heard people mention that when they send the patch to the pod using hd edit, they also hit save on the pod immediately after. Don't know if this does anything or not, never had the problem you describe. Perhaps it clears the buffer you mentioned when you do this? Quote Link to comment Share on other sites More sharing options...
aerosol_d7 Posted August 21, 2015 Author Share Posted August 21, 2015 Hey buddy I don't think it will change anything, but I will check it out for you. Because it is definitely saved. I was trying to make a volume match between patches and bypass volume. Comparing full amp with cab, full no cab, pre w cab, pre nocab.....for the same amp When you do this, you will face the problem. Maybe bypass is influencing? Bypass volume ( the one you press tuner, no mute) I'll report back soon, maybe you are right....but it is still a bug :( Thanks for your help Quote Link to comment Share on other sites More sharing options...
aerosol_d7 Posted August 25, 2015 Author Share Posted August 25, 2015 I've heard people mention that when they send the patch to the pod using hd edit, they also hit save on the pod immediately after. Tried this today, it seems to work....it's annoying though. Thanks for the tip Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.