djangob Posted July 19, 2015 Share Posted July 19, 2015 The instructions for channel scanning is incomplete in the Relay G70 & G75 Advanced Guide and in the Relay G70 & G75 User Manual There is no mention of the channel scanning process and how to use properly. I searched through other digital wireless manuals and in the XD-V75 User Manual, on page 14 I found instructions for a similar process. I assume it works the same way. This should be updated in the G75 user manuals to correctly provide instructions, as you know this really critical to an error free experience of using digital wireless systems. Also, the steps to get to the Channel Scan on the G75 are more complicated than they should be. The channel scanning procedure is something that should be done at every venue, with more than one TB516G this is an onerous process. Especially since unlike the G55, there is no indicator of wireless interference on the receiver display unless you do a channel scan. I would like this improved on the menus on the next firmware update to make this task easier to go through. Quote Link to comment Share on other sites More sharing options...
Sorg Posted February 22, 2018 Share Posted February 22, 2018 I totally agree. Do you also scan on the transmitter or only the receiver? Quote Link to comment Share on other sites More sharing options...
djangob Posted February 4, 2019 Author Share Posted February 4, 2019 On 2/22/2018 at 11:32 AM, Sorg said: I totally agree. Do you also scan on the transmitter or only the receiver? On a G75, you can only scan with the receiver/base. There is no way to scan with the TB516G transmitter. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.