Abs0luteZer0 Posted October 11, 2015 Share Posted October 11, 2015 I recently purchased a line 6 4x12 cab to go with my HD150 head, I also have a raven 4x12 and thought I would try to hook the head up to two cabinets. This looks kind of silly but I dig the tone mixture from these two different cabs. I have used this a little bit already at low practice volume but if I can I would like it as a rig in my band setup. I am very worried about damaging the cab/blowing speakers etc. and would like to know if this is safe to use. I have attached some pictures of what I'm dealing with. Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted October 12, 2015 Share Posted October 12, 2015 As long as your Raven speaker cabinet is rated for the power, there shoudl be no issue. Quote Link to comment Share on other sites More sharing options...
Abs0luteZer0 Posted October 13, 2015 Author Share Posted October 13, 2015 So having the 8ohm head connectors left/right going into each 4 ohm cab should be fine? Quote Link to comment Share on other sites More sharing options...
psarkissian Posted October 13, 2015 Share Posted October 13, 2015 DO NOT plug an amp's 8-Ohm output into a 4-Ohm input of a speaker cabinet. That is bad! Don't do that. http://line6.com/support/page/kb/_/general-faq/cabinet-connection-and-ohm-faq-r436 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.