gstew Posted February 19, 2016 Share Posted February 19, 2016 I was adding a secondary amp route and then, every 12 seconds, it flips back between these two screens. No button pushing has any affect. Unpluging and repluging into power has no affect once it comes back on, just keeps flipping back and forth. At a loss here. Fun times... Quote Link to comment Share on other sites More sharing options...
Smashcraaft Posted February 19, 2016 Share Posted February 19, 2016 Try pressing the right or down keys on startup. Does this help? Quote Link to comment Share on other sites More sharing options...
duncann Posted February 19, 2016 Share Posted February 19, 2016 Holding the left arrow while powering will do a global reset, which usually fixes this. After, hopefully, it starts working again, you'll need to do a pedal calibration: http://line6.com/support/page/kb/_/pod/pod-hd500-hd500x/pod-hd500xhd500-pedal-calibration-r161 And also make any changes you had before to the global options. Quote Link to comment Share on other sites More sharing options...
gstew Posted February 19, 2016 Author Share Posted February 19, 2016 Holding the left arrow during start up worked, thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.