sminchk67 Posted February 26, 2016 Share Posted February 26, 2016 Quote Link to comment Share on other sites More sharing options...
HonestOpinion Posted February 26, 2016 Share Posted February 26, 2016 One of the better videos I have seen on building a preset, you have a good ear (or two), thanks! One note, you are probably already aware of it but I don't think you have to assign the amp to a footswitch before setting one of the parameters on the amp to the footswitch (in your example the "Master" volume). I believe you can skip the step at 10:55 minutes in on your video. You just pick the amp block and go directly to "Global Settings" --> "Controller Assign" as you did in the next step where you assigned a footswitch to both amps' "Master" volume parameters. Quote Link to comment Share on other sites More sharing options...
sminchk67 Posted February 26, 2016 Author Share Posted February 26, 2016 I add that step so I can customize the name of the switch, I don't think it gives you the option otherwise. Quote Link to comment Share on other sites More sharing options...
HonestOpinion Posted February 26, 2016 Share Posted February 26, 2016 I add that step so I can customize the name of the switch, I don't think it gives you the option otherwise. Ah, ok, that makes sense, that screen does offer the "Customize" option for naming, although if you are not going to assign the amp to a footswitch an easier way may be to use the "Global Settings" --> "Command Center" screen which also offers the "Customize" option but saves you the effort of having to assign and then unassign the amp. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.